Advanced features (continued)
Password function
This projector is equipped with the password function that is designed for prevention of wrong operation by children and restriction on operation by other than specified users.
DISPLAY INPUT ...........When the projector is turned
on, the startup screen (or splash screen) will ap- pear and stay on the screen until the password is entered. When the password is entered, the startup screen will switch to the regular operation screen.
9.Press the ENTER button.
•If the entered passwords don’t match, an error message will appear.
•To cancel the procedure, press the MENU button.
To cancel the password function:
1.Display the FEATURE menu.
2.Press the S or T button to select PASSWORD FUNCTION.
MENU ACCESS........... All the buttons except for the
POWER button on the projector are disabled. (The buttons on the remote control are enabled.) You can use this mode as a measure of prevention
of wrong operation by children and restriction on operation by other than specified users.
SPLASH ID SCREEN... IMAGE CAPTURE and SPLASH SCREEN in the menu become unavailable. SPLASH SCREEN will be set to ON automatically.
3.Press the ENTER button.
•The screen for canceling the password function will appear.
opt. |
|
FEATURE |
|
MENU ACCESS |
|
LOCK | OK |
UNLOCK | OK |
To enable the password function:
1.Display the FEATURE menu.
2.Press the S or T button to select PASSWORD FUNCTION.
3.Press the W or X button to change the mode among DISPLAY INPUT 
, MENU ACCESS 
and
SPLASH ID SCREEN 
.
•When the password has already been set, the mode won’t be changed. In such cases, press the ENTER button to cancel the password func- tion and try again.
4.Press the ENTER button.
•The screen for entering the password will appear.
PASSWORD
1
4 | 2 | O K : ENTER |
| CANCEL : MENU |
3
5.Enter a 4 - 8 digit password using the S, X, T or W buttons on the remote control as shown below.
(S=1, X=2, T=3, W=4)
4. Press the ENTER button. |
|
• The screen for setting the password function will | |
appear. |
|
opt. |
|
FEATURE |
|
MENU ACCESS |
|
LOCK | OK |
UNLOCK | OK |
5. Press the ENTER button. |
|
• The screen for entering a password will appear. | |
6.Press the ENTER button.
•If you enter a wrong password, an error message will appear.
•To cancel the procedure, press the MENU button.
Important:
•Disable the password by pressing the MENU and ENTER buttons on the control panel at the same time about three seconds.
PASSWORD
CONFIRM
1
42
3
O K : ENTER 
CANCEL : MENU
6.Enter a 4 - 8 digit password using the S, X, T or W buttons on the remote control as shown below.
(S=1, X=2, T=3, W=4)
7.Press the ENTER button.
•To cancel the procedure, press the MENU button.
8.Enter the password again for confirmation using the same steps.