Mitsumi electronic HD8000 Menu operation, How to set the menus, Available settings in the menus

EN-23

Menu operation (continued)
	How to set the menus:			4. Press the S or T button to select an item to adjust.
	Following describe how to set AUTO POWER OFF					AUTO POWER	OFF
	time.					ON	OFF
						OFF
						AUTO POWER
	1. Press the MENU button.
				5. Set the selected item by pressing the W or X button.
		opt.
						AUTO POWER	OFF
						ON
		IMAGE				AUTO POWER	30min
						OFF
	2. Press the W or X button to select a menu to use.			To cancel the menu:
		opt.		6.	Press the MENU button several times.
		INSTALLATION		Important:
				• When the MENU button doesn’t function, unplug
	3. Press the ENTER button (or T button).
					the power cord from the wall outlet. Wait about 10
		opt.			minutes, plug the power cord in, and try again.
		INSTALLATION		•	After selecting the items marked with , press the
					ENTER button.
		LAMP MODE	STANDARD

Available settings in the menus

Set the following items on their relevant menus.

1. IMAGE menu IMAGE - ADVANCED menu

opt. opt.

						IMAGE
	IMAGE
		COLOR	AUTO			ADVANCED MENU
		ENHANCER
		CONTRAST	0			NOISE REDUCTION		ON
		BRIGHTNESS	0			CTI		ON
		COLOR TEMP.	STANDARD			INPUT LEVEL		0
		COLOR	0
		TINT	0
		SHARPNESS	0
		ADVANCED MENU	OK
ITEM					SETTING		FUNCTION
COLOR ENHANCER					AUTO		Select to optimize the settings automatically depending on the input
							signal. (Select this option for normal use.)
				PRESENTATION			Select to make the displayed image look bright and crisp.
					STANDARD		Select to make the displayed image look natural.
					THEATER		This option, suitable for viewing movies, makes the displayed image look
							soft and smooth.
					sRGB		Select to give priority to the color reproducibility.

•When COLOR ENHANCER is sRGB, COLOR TEMP., COLOR and TINT can’t be adjusted.

	USER	Select to set the gamma curve or adjust the color intensity or color
		balance as desired. (See page 29.)
CONTRAST	±30	Use to adjust the contrast of the projected image. (See page 28.)
BRIGHTNESS	±30	Use to adjust the brightness of the projected image. (See page 28.)
COLOR TEMP.	4 options	Use to adjust the color temperature. (See page 29.)
COLOR	±10	Use to adjust the color thickness of the projected image. (See page 28.)

•When the COMPUTER1, COMPUTER2 or DVI is selected as the input source, COLOR can’t be adjusted.

TINT ±10 Use to adjust the color tint of the projected image. (See page 28.)

•When the COMPUTER1, COMPUTER2 or DVI is selected as the input source, TINT can’t be adjusted.

•TINT is available only when the NTSC signal is input.

SHARPNESS	±5	Use to adjust the sharpness of the projected image. (See page 28.)
ADVANCED MENU
NOISE REDUCTION	ON / OFF	Use to reduce noise and roughness in the image when noisy video signal
		is input.
CTI	ON / OFF	Use to correct smeared color boundaries.
INPUT LEVEL	±5	For analog signal input: The input level of video signal differs among
		devices to be connected. High input level causes solid white in displayed
		image and low input level causes displayed image to get dark. Use this
		menu to adjust the input level of analog video signal.
	ENHANCED /	For digital signal input: When a digital signal is input, ENHANCED and
	NORMAL	NORMAL are switchable. (See page 19.)

•INPUT LEVEL is unavailable when the digital signal is supplied from the YCBCR/YPBPR terminal of the connected device.