Mitsumi electronic HD8000 user manual EN-27

Page 27

Menu operation (continued)

5. INFORMATION menu

 

opt.

 

INFORMATION

 

 

LAMP TIME (LOW)

0 H

 

 

 

INPUT

COMPUTER2

 

RESOLUTION

1024x768

 

VERTICAL

75.04 Hz

 

FREQUENCY

 

 

 

HORIZONTAL

60.02 KHz

 

FREQUENCY

 

 

R G

B

 

H V

SYNC. TYPE

5wire

ITEM

DESCRIPTION

LAMP TIME (LOW)

This item shows a lamp operating time (hour) calculated based on that LAMP MODE is LOW.

When the LAMP MODE is STANDARD, this item shows a longer lamp operating time than the actual time. (See page 39 for the interval of lamp replacement.)

When the lamp operating time is 0 to 10 hours, “0H” is displayed. The lamp operating time exceeding 10 hours is indicated by the actual hours.

When the lamp operating time reaches 3000 hours, the bar turns to yellow. When it reaches 3800 hours, the bar turns to red.

INPUT

Indicates the name of the terminal to which the currently projected video signal is being input.

RESOLUTION

Indicates the resolution of the currently projected video signal.

VERTICAL FREQUENCY

Indicates the vertical frequency of the currently projected video signal.

HORIZONTAL FREQUENCY

Indicates the horizontal frequency of the currently projected video signal.

SYNC. TYPE

Indicates the type of the sync signal for the currently projected video signal.

EN-27

Image 27
Contents HD8000 Compliance Notice When using the projector in EuropeContents Important safeguards Do not keep using the damaged projector Important safeguardsChecking accessories Inserting the batteries into the remote controlPreparing your projector Preparating your projector OverviewControl area Terminal board Bottom side Remote controlReception angle Using the remote controlOperational range of the remote control Using the wired remote controlScreen size and projection distance Setting up your projectorSetting up the screen When the aspect ratio of the screen isWhen projected images are distorted to a trapezoid Setting up your projectorAdjusting the projection angle When fine streaks are seen on projected imagesRear projection Front projection, ceiling mountingViewing computer images Connecting the projector to a computerFor audio output connection Plugging the power cordViewing computer images For monitor connectionRemove the lens cap Projecting imagesAV mute When connecting to a notebook computerExample of the setting procedure for external output To stop projectingConnecting the projector to video equipment Connecting to a video player, etcViewing video images Viewing video images Projector + DVD player or Hdtv decoderConnection for video equipment having an Hdmi terminal Connection for video equipment having a DVI-D terminal Plugging in the power cordEN-20 With the Feature menu Volume from the speakerSetting the aspect ratio How to change the settings With the remote controlMenu operation SetupHow to set the menus Available settings in the menusMenu operation EN-24 EN-25 EN-26 EN-27 To sharpen or soften the projected image Sharpness Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the color Color and TintColor Enhancer Adjusting projected imagesTo adjust the tone of white Color Temp About color temperatureYES How to adjust the computer imageLPF Progressive filter Simple method to adjust the image positionTo adjust the horizontal position To adjust the vertical positionSet the image size Advanced featuresSetting procedure Set the background colorTo enable the password function Advanced featuresPassword function To cancel the password functionTo change the input source of the left or right screen To use the split modeSplit FreezeUp button Mouse remote controlProjector + computer with USB connector OperationAbout PJLink Supervising and controlling by computerProjectorView PJLinkNormal condition IndicatorsTerminal cover with anti-theft alarm device Procedure for setting the anti-theft alarm deviceProcedure for changing batteries Replacing the lamp Interval of lamp replacementReset of the lamp operation time Replacing the lampTo replace the lamp Cleaning of the lens MaintenanceCleaning of the air-filter Cleaning of the projector and the ventilation slotsFor the air-filter white Accessory air-filter unitAttaching the accessory air-filter unit Cleaning the air-filterNo image appears on the screen TroubleshootingTroubleshooting No image appears on the screen Problem SolutionImages are not displayed correctly Problem Solution Kensington Lock Others Problem SolutionSpecifications Replacement part option/not included in the boxXGA85 SpecificationsWithout terminal cover With terminal cover ConnectorsDimension drawings unit mm Real modeMitsubishi Electric Corporation