Planar PR5020, PR3020 Starting and Shutting down the Projector, DLP Projector - User’s Manual

Page 21
Starting and Shutting down the Projector

DLP® Projector – User’s Manual

Starting and Shutting down the Projector

1.

2.

Slide the lens cover.

Connect the power cord to the projector [A] Connect the other end to a wall outlet. Switch [B] from on (O) to off ( )

3. The POWER and READY LEDs on the pro- jector turn on.

Turn on the connected devices.

4.

5.

Ensure the Ready LED is on a steady (not flashing) orange and then press the Power button to turn on the projector.

The projector splash screen displays and con- nected devices are detected.

If the connected device is a PC, press the ap- propriate keys on the computer keyboard to switch the display output to the projector.

(Check the user manual of the PC to deter- mine the appropriate Fn key combination to change display output.)

See “Setting an Access Password (Security Lock)” on page 15 if Security Lock is en- abled.

If more than one input device is connected, press the Source button repeatedly to switch among devices.

(DVD and HDTV are supported through the VGA connector.)

6. To turn off the projector, press the Power button. The projector prepares for shutdown and a “Wait a moment please…” message appears.

13

Image 21
Contents Page Planar Customer Support Planar Systems, IncCorporate Headquarters 1195 NW Compton Drive Beaverton, OR Telephone US 1-866-PLANAR1 866 Outside US 503Copyright User’s ManualDisclaimer Trademark RecognitionSymbols Used Important Safety InformationRemote Control General Safety InformationCleaning the Projector Power SafetySymbol Explanations Replacing the LampCables, Replacement Lamps and Accessories Main FeaturesAbout this manual Register Your Planar Products TodaySETUP AND OPERATION Table of contentsON-SCREEN DISPLAY OSD MENU SETTINGS MAINTENANCE AND SECURITYPR5020 Projection distance and size table SAFETY CERTIFICATIONSTIMING MODE TABLE REGULATORY COMPLIANCEPacking Checklist GETTING STARTEDAvoid using the projector in dusty environments Views of Projector Parts Front-right ViewPush to release height adjuster Height-adjuster buttonTop view-On-screen Display OSD buttons and LEDs DLP Projector - User’s ManualUser’s Manual Rear view Security Lock Bottom viewSecure to permanent object with a Kensington Lock systemRemote Control Parts Page Down Page down when connected through USB to a PCProjector and Remote Control Buttons Remote Control Operating RangeInserting the Remote Control Batteries SETUP AND OPERATIONConnecting Input Devices User’s Manual Starting and Shutting down the Projector Turn off the main Power switch when the Ready LED stops flashing Setting an Access Password Security Lock Adjusting the Projector Level Adjusting the Zoom, Focus and Keystone Adjusting the VolumeUse the Keystone button to correct image distor- tion ON-SCREEN DISPLAY OSD MENU SETTINGS Navigating the OSDOSD Menu Controls Setting the OSD Language User’s Manual Main Menu InputGamma x = available to video source Main Menu Functions Available for Connected SourceSetup Menu Setup Menu Functions Available for Connected SourceData source Advance FeatureDLP Projector - User’s Manual User Color The Config menu functions are available to all video sources Config MenuUtility Menu Utility Menu Functions Available for Connected Source Tool Menu These Status MenuReplacing the Projection Lamp MAINTENANCE AND SECURITY2. Open the lamp com- partment cover B 3. Remove the two screws from the lamp module C4. Lift the module handle up D Pull firmly on the mod- ule handle to remove the lamp module D Reverse steps 1 to 5 to install the new lamp moduleCleaning the Projector Resetting the LampCleaning the Lens Cleaning the CaseUsing the Kensington Lock TROUBLESHOOTING Common problems and solutionsTips for Troubleshooting Image Problems LED Error MessagesProblem No image appears on the screen Problem The image is blurredRemote Control Problems Lamp ProblemsAudio Problems Problem The image is flat with no contrastInput/output connectors SPECIFICATIONSPR3010 PR3020PR3020 and PR3010 Projection distance and size table Projection Distance V.S. Projection SizeL Projection Distance Shaded rows are equivalent measurement in feet and inches PR5020 Projection distance and size tableSignal Timing Mode TableResolution Video300 mm11.8 mm396 244 mm9.6 Projector DimensionsREGULATORY COMPLIANCE Safety CertificationsFCC Warning CanadaPlanar Customer Support Planar Systems, Inc