Planar PR5020, PR3020 manual Main Menu, Input, Gamma, DLP Projector - User’s Manual

Page 29

Main Menu

DLP® Projector – User’s Manual

Main Menu

Press the Menu button to open the OSD menu. Press the cursor button to move to the Main

menu. Press the cursor button to move up and down in the Main menu. Press to change values for settings, and then press Enter or to confirm the new setting.

ITEM		DESCRIPTION	DEFAULT

Brightness	Press the cursor	button to adjust the brightness. (Range: 0 – 100)	50

Contrast	Press the cursor	button to adjust the contrast. (Range: 0 – 100)	50

Sharpness	Press the cursor	button to adjust the display sharpness (Range: 1-5)	3

Color	Press the cursor	button to adjust the color temperature.	Normal
Temperature	(Range: Cool/Normal/Warm)

Color	Press the cursor	button to adjust the video saturation. (Range: 0 – 100)	50
Saturation

Color Tint	Press the cursor	button to adjust the video tint/hue. (Range: 0 – 100)	50

Gamma	Press the cursor	button to adjust the gamma correction of the display.	Data source:
	Input	Gamma	PC
	Input	Gamma	Video source:
	PC	2.2	Video source:
	PC	2.2	Video
	MAC	1.8	Video
	MAC	1.8
	Video	2.4
	Chart	2.2
	B&W	2.4
Color Space	Press the cursor	button to adjust the color space.	Auto
	(Range: Auto – RGB – YPbPr- YCbCr)

Reset	Resets all Main settings to default values		—

– 21 –

Image 29

Contents Page Planar Customer Support Planar Systems, IncCorporate Headquarters 1195 NW Compton Drive Beaverton, OR Telephone US 1-866-PLANAR1 866 Outside US 503Copyright User’s ManualDisclaimer Trademark RecognitionSymbols Used Important Safety InformationRemote Control General Safety InformationCleaning the Projector Power SafetySymbol Explanations Replacing the LampCables, Replacement Lamps and Accessories Main FeaturesAbout this manual Register Your Planar Products TodaySETUP AND OPERATION Table of contentsON-SCREEN DISPLAY OSD MENU SETTINGS MAINTENANCE AND SECURITYPR5020 Projection distance and size table SAFETY CERTIFICATIONSTIMING MODE TABLE REGULATORY COMPLIANCEAvoid using the projector in dusty environments Packing ChecklistGETTING STARTED Views of Projector Parts Front-right ViewPush to release height adjuster Height-adjuster buttonTop view-On-screen Display OSD buttons and LEDs DLP Projector - User’s ManualUser’s Manual Rear view Security Lock Bottom viewSecure to permanent object with a Kensington Lock systemRemote Control Parts Page Down Page down when connected through USB to a PCProjector and Remote Control Buttons Remote Control Operating RangeInserting the Remote Control Batteries SETUP AND OPERATIONConnecting Input Devices User’s Manual Starting and Shutting down the Projector Turn off the main Power switch when the Ready LED stops flashing Setting an Access Password Security Lock Adjusting the Projector Level Use the Keystone button to correct image distor- tion Adjusting the Zoom, Focus and KeystoneAdjusting the Volume OSD Menu Controls ON-SCREEN DISPLAY OSD MENU SETTINGSNavigating the OSD Setting the OSD Language User’s Manual Gamma Main MenuInput x = available to video source Main Menu Functions Available for Connected SourceSetup Menu Setup Menu Functions Available for Connected SourceData source Advance FeatureDLP Projector - User’s Manual User Color The Config menu functions are available to all video sources Config MenuUtility Menu Utility Menu Functions Available for Connected Source Tool Menu These Status MenuReplacing the Projection Lamp MAINTENANCE AND SECURITY4. Lift the module handle up D 2. Open the lamp com- partment cover B3. Remove the two screws from the lamp module C Pull firmly on the mod- ule handle to remove the lamp module D Reverse steps 1 to 5 to install the new lamp moduleCleaning the Projector Resetting the LampUsing the Kensington Lock Cleaning the LensCleaning the Case Tips for Troubleshooting TROUBLESHOOTINGCommon problems and solutions Image Problems LED Error MessagesProblem No image appears on the screen Problem The image is blurredRemote Control Problems Lamp ProblemsAudio Problems Problem The image is flat with no contrastInput/output connectors SPECIFICATIONSPR3010 PR3020L Projection Distance PR3020 and PR3010 Projection distance and size tableProjection Distance V.S. Projection Size Shaded rows are equivalent measurement in feet and inches PR5020 Projection distance and size tableSignal Timing Mode TableResolution Video300 mm11.8 mm396 244 mm9.6 Projector DimensionsREGULATORY COMPLIANCE Safety CertificationsFCC Warning CanadaPlanar Customer Support Planar Systems, Inc