Planar PR5020, PR3020 manual Status Menu, DLP Projector - User’s Manual, These

Page 39

Status Menu

DLP® Projector – User’s Manual

Status Menu

Press the Menu button to open the Main menu. Press the cursor button to move to the Status menu. Press the cursor button to move up and down in the Status menu.

ITEM		DESCRIPTION	DEFAULT

Video	Displays the resolution and refresh rate for RGB/DVI mode.
Information	Displays the color standard for video mode.
			These
Active Source	Displays the active source.		These
			items are
			items are
Software	Displays information about the software version.		display
Version			only.

Lamp Hours	Shows the number of hours lamp has been in use for Eco , Normal and
	Boost modes.

Lamp Mode	Press the cursor	button to choose the lamp mode.	Normal
	Range: Eco , Normal and Boost.
	Eco mode uses less power and extends lamp life, but decreases lamp
	brightness.
	Boost mode uses more power and reduces lamp life, but increases lamp
	brightness.

Lamp Hour	After replacing the lamp, this item should be reset. Refer to “Replacing the Pro-		—
Reset	jection Lamp” on page 32.

– 31 –

Image 39

Contents Page Telephone US 1-866-PLANAR1 866 Outside US 503 Planar Systems, IncPlanar Customer Support Corporate Headquarters 1195 NW Compton Drive Beaverton, ORTrademark Recognition User’s ManualCopyright DisclaimerGeneral Safety Information Important Safety InformationSymbols Used Remote ControlReplacing the Lamp Power SafetyCleaning the Projector Symbol ExplanationsRegister Your Planar Products Today Main FeaturesCables, Replacement Lamps and Accessories About this manualMAINTENANCE AND SECURITY Table of contentsSETUP AND OPERATION ON-SCREEN DISPLAY OSD MENU SETTINGSREGULATORY COMPLIANCE SAFETY CERTIFICATIONSPR5020 Projection distance and size table TIMING MODE TABLEPacking Checklist GETTING STARTEDAvoid using the projector in dusty environments Views of Projector Parts Front-right ViewDLP Projector - User’s Manual Height-adjuster buttonPush to release height adjuster Top view-On-screen Display OSD buttons and LEDsUser’s Manual Rear view system Bottom viewSecurity Lock Secure to permanent object with a Kensington LockRemote Control Parts Page Down Page down when connected through USB to a PCProjector and Remote Control Buttons Remote Control Operating RangeInserting the Remote Control Batteries SETUP AND OPERATIONConnecting Input Devices User’s Manual Starting and Shutting down the Projector Turn off the main Power switch when the Ready LED stops flashing Setting an Access Password Security Lock Adjusting the Projector Level Adjusting the Zoom, Focus and Keystone Adjusting the VolumeUse the Keystone button to correct image distor- tion ON-SCREEN DISPLAY OSD MENU SETTINGS Navigating the OSDOSD Menu Controls Setting the OSD Language User’s Manual Main Menu InputGamma x = available to video source Main Menu Functions Available for Connected SourceSetup Menu Setup Menu Functions Available for Connected SourceData source Advance FeatureDLP Projector - User’s Manual User Color The Config menu functions are available to all video sources Config MenuUtility Menu Utility Menu Functions Available for Connected Source Tool Menu These Status MenuReplacing the Projection Lamp MAINTENANCE AND SECURITY2. Open the lamp com- partment cover B 3. Remove the two screws from the lamp module C4. Lift the module handle up D Pull firmly on the mod- ule handle to remove the lamp module D Reverse steps 1 to 5 to install the new lamp moduleCleaning the Projector Resetting the LampCleaning the Lens Cleaning the CaseUsing the Kensington Lock TROUBLESHOOTING Common problems and solutionsTips for Troubleshooting Problem The image is blurred LED Error MessagesImage Problems Problem No image appears on the screenProblem The image is flat with no contrast Lamp ProblemsRemote Control Problems Audio ProblemsPR3020 SPECIFICATIONSInput/output connectors PR3010PR3020 and PR3010 Projection distance and size table Projection Distance V.S. Projection SizeL Projection Distance Shaded rows are equivalent measurement in feet and inches PR5020 Projection distance and size tableVideo Timing Mode TableSignal Resolution300 mm11.8 mm396 244 mm9.6 Projector DimensionsCanada Safety CertificationsREGULATORY COMPLIANCE FCC WarningPlanar Customer Support Planar Systems, Inc