Planar PR3020, PR5020 manual Preface, Important Safety Information, Symbols Used, Remote Control

Page 4

Preface

Preface

Important Safety Information

Congratulations on purchasing the Planar DLP® projector!

Important:

It is strongly recommended that you read this section carefully before using the projector. These safety and usage instructions will ensure that you enjoy many years of safe use of the projector. Keep this manual for future reference.

Symbols Used

Warning symbols are used on the unit and in this manual to alert you of hazardous situations. The following styles are used in this manual to alert you to important information.

Note:

Provides additional information on the topic at hand.

Important:

Provides additional information that should not be overlooked.

Caution:

Alerts you to situations that may damage the unit.

Warning:

Alerts you to situations that may damage the unit, create a hazardous environment, or cause per- sonal injury.

Throughout this manual, component parts and items in the OSD menus are denoted in bold font as in this example:

“Push the Menu button on the remote control to open the Main menu.”

Remote Control

Some remote controls have a laser for pointing out items on a screen.

DANGER: Do not point the laser in the eyes. Doing so can damage the eyes permanently.

General Safety Information

¾Do not open the unit case. Aside from the projection lamp, there are no user-serviceable parts in the unit. For servicing, contact qualified service personnel.

¾Follow all warnings and cautions in this manual and on the unit case.

¾The projection lamp is extremely bright by design. To avoid damage to eyes, do not look into the lens when the lamp is on.

¾Do not place the unit on an unstable surface, cart, or stand.

¾Avoid using the system near water, in direct sunlight, or near a heating device.

¾Do not place heavy objects such as books or bags on the unit.

– iii –

Image 4

Contents Page Planar Systems, Inc Planar Customer SupportCorporate Headquarters 1195 NW Compton Drive Beaverton, OR Telephone US 1-866-PLANAR1 866 Outside US 503User’s Manual CopyrightDisclaimer Trademark RecognitionImportant Safety Information Symbols UsedRemote Control General Safety InformationPower Safety Cleaning the ProjectorSymbol Explanations Replacing the LampMain Features Cables, Replacement Lamps and AccessoriesAbout this manual Register Your Planar Products TodayTable of contents SETUP AND OPERATIONON-SCREEN DISPLAY OSD MENU SETTINGS MAINTENANCE AND SECURITYSAFETY CERTIFICATIONS PR5020 Projection distance and size tableTIMING MODE TABLE REGULATORY COMPLIANCEGETTING STARTED Packing ChecklistAvoid using the projector in dusty environments Front-right View Views of Projector PartsHeight-adjuster button Push to release height adjusterTop view-On-screen Display OSD buttons and LEDs DLP Projector - User’s ManualUser’s Manual Rear view Bottom view Security LockSecure to permanent object with a Kensington Lock systemRemote Control Parts Page down when connected through USB to a PC Page DownRemote Control Operating Range Projector and Remote Control ButtonsSETUP AND OPERATION Inserting the Remote Control BatteriesConnecting Input Devices User’s Manual Starting and Shutting down the Projector Turn off the main Power switch when the Ready LED stops flashing Setting an Access Password Security Lock Adjusting the Projector Level Adjusting the Volume Adjusting the Zoom, Focus and KeystoneUse the Keystone button to correct image distor- tion Navigating the OSD ON-SCREEN DISPLAY OSD MENU SETTINGSOSD Menu Controls Setting the OSD Language Setting the OSD Language Input Main MenuGamma Main Menu Functions Available for Connected Source x = available to video sourceSetup Menu Functions Available for Connected Source Setup MenuAdvance Feature Data sourceDLP Projector - User’s Manual User Color Config Menu The Config menu functions are available to all video sourcesUtility Menu Utility Menu Functions Available for Connected Source Tool Menu Status Menu TheseMAINTENANCE AND SECURITY Replacing the Projection Lamp3. Remove the two screws from the lamp module C 2. Open the lamp com- partment cover B4. Lift the module handle up D Reverse steps 1 to 5 to install the new lamp module Pull firmly on the mod- ule handle to remove the lamp module DResetting the Lamp Cleaning the ProjectorCleaning the Case Cleaning the LensUsing the Kensington Lock Common problems and solutions TROUBLESHOOTINGTips for Troubleshooting LED Error Messages Image ProblemsProblem No image appears on the screen Problem The image is blurredLamp Problems Remote Control ProblemsAudio Problems Problem The image is flat with no contrastSPECIFICATIONS Input/output connectorsPR3010 PR3020Projection Distance V.S. Projection Size PR3020 and PR3010 Projection distance and size tableL Projection Distance PR5020 Projection distance and size table Shaded rows are equivalent measurement in feet and inchesTiming Mode Table SignalResolution VideoProjector Dimensions 300 mm11.8 mm396 244 mm9.6Safety Certifications REGULATORY COMPLIANCEFCC Warning CanadaPlanar Systems, Inc Planar Customer Support