Sharp AL-1451 operation manual Description of Special Functions, Toner Save Mode, Preheat mode

4

Special functions

4 SPECIAL FUNCTIONS

DESCRIPTION OF SPECIAL FUNCTIONS

This chapter describes the special functions of this copier. Use these functions as needed.

Toner save mode (page 24)

Reduces toner consumption by approximately 10%.

Power save modes (page 25)

The copier has two power save modes of operation: preheat mode and auto power shut-off mode.

●Preheat mode

When the copier enters the preheat mode, the power save ( ) indicator will light up and other indicators will remain on or off as before. In this condition, the fuser in the copier is maintained at a lower heat level, thereby saving power. To copy from the preheat mode,

make desired copier selections and press the print (	) key using the normal copying
procedure.

●Auto power shut-off mode

When the copier enters the auto power shut-off mode, the power save ( ) indicator will light up and other indicators will go out. The auto power shut-off mode saves more power than the preheat mode but requires a longer time before starting copying. To copy from the

auto power shut-off mode, press the print (		) key. Then make desired copier selections
and press the print (	) key using the normal copying procedure.

Auto clear (page 25)

The copier returns to the initial settings a preset amount of time after the last copy is made. This preset amount of time (auto clear time) can be changed.

Stream feeding mode (page 25)

For description of the stream feeding mode, see page 20.

TONER SAVE MODE

1 Press the exposure mode selector key to select the manual ( ) mode.

24