Sharp AL-1451 operation manual User Maintenance, Cabinet, Original table and original cover

Page 32

5

Supplies and user maintenance

USER MAINTENANCE

Proper care is essential in order to get clean, sharp copies. Be sure to take a few minutes to regularly clean the copier.

Before cleaning, be sure to turn the power switch off and remove the power cord from the outlet.

Do not use thinner, benzene or other volatile cleaning agents. Doing so may cause deformation, discoloration, deterioration or malfunction.

Cabinet

Wipe the cabinet with a soft, clean cloth.

Original table and original cover

Stains on the glass, cover or SPF roller will also be copied. Wipe the glass, cover and SPF roller with a soft, clean cloth. If necessary, dampen the cloth with a glass cleaner.

Original table

Original cover

SPF roller

30

Image 32

Contents AL-1451 For Your Protection Or 1-877-SHARP-CC toll free/905-568-7140 in CanadaContents Appendix Conventions used in this manual Getting StartedIntroduction High-quality digital image Main FeaturesHigh-speed laser copying Printer feature Substantial copying functionsScan once/ Print many Environmentally friendly designPart Names Operation Panel Installation Copier InstallationBe sure to allow the required space around Checking Packed Components and Accessories UnpackingRemoving Protective Packing Materials Installing the TD Cartridge Loading Copy Paper installing the paper tray Corner hooks Power to Copier Power on Initial settings of operation panelMaking Copies PaperWhen using the SPF Normal CopyingWhen using the original table Exposure ADJUSTMENT/PHOTO Copying Stream feeding modeTo select a preset copy ratio To select a zoom ratio REDUCTION/ENLARGEMENT/ZOOMBypass Feed special paper TWO-SIDED Copying Toner Save Mode Preheat modeAuto power shut-off mode Special FunctionsToner Save Mode Displaying Total Number of Copies OFFSupplies and User Maintenance TD Cartridge ReplacementDrum Cartridge Replacement TD CartridgeDrum Cartridge Replacement Original table and original cover User MaintenanceCabinet Transfer charger When copier is not in use Copier TROUBLE? Misfeed RemovalMisfeed in the fusing area Misfeed in the paper feed areaMisfeed in the transport area Misfeed in the SPF Roller rotating knob Troubleshooting Problem Possible cause Solution SeeStatus Indicators Indication Cause and remedy SeeAutomatic Exposure Adjustment Specifications AppendixSpecifications Proper storage Supply Part Numbers and StorageSupply list TD Cartridge Replacement Moving InstructionsIndex NamesPacked components Paper Loading Special Memo Memo For users in the USA Sharp Electronics Corporation