Sharp AL-1451 operation manual Misfeed in the transport area

Page 37

MISFEED REMOVAL

●Do not touch the surface of the drum (green portion) of the drum cartridge

when removing the misfed paper. Doing so may cause smudges on copies.

● Do not remove the misfed paper from above the fusing unit. Unfixed toner on the paper may stain the paper transport area, resulting in smudges on copies.

3	Raise the fusing unit release lever and then close the side cover by pressing the
	round projections near the side cover open button. The misfeed ( ) indicator will go
	out and the ready (	) indicator will light up.

C Misfeed in the transport area

1

2

Lower the fusing unit release lever.

Fusing unit release lever

6

Copier trouble?

Push gently on both sides of the front cover to open the cover.

35

Image 37

Contents AL-1451 Or 1-877-SHARP-CC toll free/905-568-7140 in Canada For Your ProtectionContents Appendix Introduction Getting StartedConventions used in this manual High-speed laser copying Main FeaturesHigh-quality digital image Substantial copying functions Printer featureScan once/ Print many Environmentally friendly designPart Names Operation Panel Copier Installation InstallationBe sure to allow the required space around Unpacking Checking Packed Components and AccessoriesRemoving Protective Packing Materials Installing the TD Cartridge Loading Copy Paper installing the paper tray Corner hooks Power to Copier Initial settings of operation panel Power onPaper Making CopiesNormal Copying When using the SPFWhen using the original table Stream feeding mode Exposure ADJUSTMENT/PHOTO CopyingREDUCTION/ENLARGEMENT/ZOOM To select a preset copy ratio To select a zoom ratioBypass Feed special paper TWO-SIDED Copying Preheat mode Toner Save ModeAuto power shut-off mode Special FunctionsToner Save Mode OFF Displaying Total Number of CopiesTD Cartridge Replacement Supplies and User MaintenanceTD Cartridge Drum Cartridge ReplacementDrum Cartridge Replacement Cabinet User MaintenanceOriginal table and original cover Transfer charger When copier is not in use Misfeed Removal Copier TROUBLE?Misfeed in the paper feed area Misfeed in the fusing areaMisfeed in the transport area Misfeed in the SPF Roller rotating knob Problem Possible cause Solution See TroubleshootingIndication Cause and remedy See Status IndicatorsAutomatic Exposure Adjustment Appendix SpecificationsSpecifications Supply list Supply Part Numbers and StorageProper storage Moving Instructions TD Cartridge ReplacementNames IndexPacked components Paper Loading Special Memo Memo For users in the USA Sharp Electronics Corporation