6
Copier trouble?
MISFEED REMOVAL
3 | Rotate the feeding roller in the direction of the arrow and gently remove the misfed | |
paper from the exit area. | ||
| ||
| Feeding roller |
4 | Raise the fusing unit release lever, close the front cover and then close the side cover | ||
by pressing the round projections near the side cover open button. The misfeed ( ) | |||
| |||
| indicator will go out and the ready ( | ) indicator will light up. | |
When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged.
D Misfeed in the SPF
An original misfeed may occur at one of three locations: if the misfed original is seen from the document feeder tray, (A) in the document feeder tray; if the misfed original is not seen from the document feeder tray, (B) in the exit area or (C) under the feeding roller. Remove the misfed original following the instructions for each location.
(A)Open the feeding roller cover and pull the original gently to the left and out from the document feeder tray. Close the feeding roller cover. Open and close the original cover to clear the SPF misfeed (
) indicator.
If the misfed original cannot be easily removed, proceed to (C) under the feeding roller without pulling the original forcibly from the document feeder tray.
Feeding roller cover
36