Sharp AL-1451 operation manual Transfer charger

Page 33

USER MAINTENANCE

Transfer charger

If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean the charger using the following procedure.

		1	Turn the power switch off.
		1
			Open the side cover while pressing the side cover open button.
		2
		2
			Take the charger cleaner out by holding the tab.
		3	Take the charger cleaner out by holding the tab.
		3	Set the charger cleaner onto the right end of the transfer charger, gently slide the
			cleaner to the left end, and then remove it. Repeat this operation two or three times.

			Slide the charger cleaner from the right end to the left end along the groove of

			the transfer charger. If the cleaner is stopped on the way, smudges on copies
			may occur.

	4	Return the charger cleaner to its original position. Close the side cover by pressing
	4	the round projections near the side cover open button.
		the round projections near the side cover open button.

5	Turn the power switch on.
5

5

Supplies and user maintenance

31

Image 33

Contents AL-1451 Or 1-877-SHARP-CC toll free/905-568-7140 in Canada For Your ProtectionContents Appendix Getting Started IntroductionConventions used in this manual Main Features High-speed laser copyingHigh-quality digital image Substantial copying functions Printer featureScan once/ Print many Environmentally friendly designPart Names Operation Panel Copier Installation InstallationBe sure to allow the required space around Unpacking Checking Packed Components and AccessoriesRemoving Protective Packing Materials Installing the TD Cartridge Loading Copy Paper installing the paper tray Corner hooks Power to Copier Initial settings of operation panel Power onPaper Making CopiesNormal Copying When using the SPFWhen using the original table Stream feeding mode Exposure ADJUSTMENT/PHOTO CopyingREDUCTION/ENLARGEMENT/ZOOM To select a preset copy ratio To select a zoom ratioBypass Feed special paper TWO-SIDED Copying Preheat mode Toner Save ModeAuto power shut-off mode Special FunctionsToner Save Mode OFF Displaying Total Number of CopiesTD Cartridge Replacement Supplies and User MaintenanceTD Cartridge Drum Cartridge ReplacementDrum Cartridge Replacement User Maintenance CabinetOriginal table and original cover Transfer charger When copier is not in use Misfeed Removal Copier TROUBLE?Misfeed in the paper feed area Misfeed in the fusing areaMisfeed in the transport area Misfeed in the SPF Roller rotating knob Problem Possible cause Solution See TroubleshootingIndication Cause and remedy See Status IndicatorsAutomatic Exposure Adjustment Appendix SpecificationsSpecifications Supply Part Numbers and Storage Supply listProper storage Moving Instructions TD Cartridge ReplacementNames IndexPacked components Paper Loading Special Memo Memo For users in the USA Sharp Electronics Corporation