Sharp AL-1451 operation manual Drum Cartridge Replacement, TD Cartridge

Page 30

5

Supplies and user maintenance

TD CARTRIDGE REPLACEMENT

3

Install a new TD cartridge. To install the new cartridge, see page 12, INSTALLING

THE TD CARTRIDGE.

 

 

 

4

Close the front cover and then the side cover by pressing the round projections near

the side cover open button. The indicator will go out and the ready (

) indicator

 

will light up.

When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged.

DRUM CARTRIDGE REPLACEMENT

The useful life of the drum cartridge is approximately 18,000 copies. When the internal counter reaches approximately 17,000 copies, the drum replacement required ( ) indicator will light up indicating that replacement of the drum cartridge will be needed soon. For more information on purchasing the drum cartridge, see SUPPLY PART NUMBERS AND STORAGE on page

43.When the indicator begins to blink, the copier will stop operating until the cartridge is replaced. Replace the drum cartridge at this time.

Do not remove the protective cover on the drum portion (black paper) of a new drum cartridge before use. The cover protects the drum against external light.

1

Open the side cover while pressing the side cover open button.

Then, push gently on both sides of the front cover to open the cover.

 

2

Gently pull the TD cartridge out while pressing the lock release button. To remove the

TD cartridge, see page 27, step 2.

 

3

Hold the handle of the drum cartridge and gently pull the cartridge out. Dispose of the

old drum cartridge in accordance with local regulations.

 

28

Image 30
Contents AL-1451 For Your Protection Or 1-877-SHARP-CC toll free/905-568-7140 in CanadaContents Appendix Getting Started IntroductionConventions used in this manual Main Features High-speed laser copyingHigh-quality digital image Scan once/ Print many Printer featureSubstantial copying functions Environmentally friendly designPart Names Operation Panel Installation Copier InstallationBe sure to allow the required space around Checking Packed Components and Accessories UnpackingRemoving Protective Packing Materials Installing the TD Cartridge Loading Copy Paper installing the paper tray Corner hooks Power to Copier Power on Initial settings of operation panelMaking Copies PaperWhen using the SPF Normal CopyingWhen using the original table Exposure ADJUSTMENT/PHOTO Copying Stream feeding modeTo select a preset copy ratio To select a zoom ratio REDUCTION/ENLARGEMENT/ZOOMBypass Feed special paper TWO-SIDED Copying Auto power shut-off mode Toner Save ModePreheat mode Special FunctionsToner Save Mode Displaying Total Number of Copies OFFSupplies and User Maintenance TD Cartridge ReplacementDrum Cartridge Replacement TD CartridgeDrum Cartridge Replacement User Maintenance CabinetOriginal table and original cover Transfer charger When copier is not in use Copier TROUBLE? Misfeed RemovalMisfeed in the fusing area Misfeed in the paper feed areaMisfeed in the transport area Misfeed in the SPF Roller rotating knob Troubleshooting Problem Possible cause Solution SeeStatus Indicators Indication Cause and remedy SeeAutomatic Exposure Adjustment Specifications AppendixSpecifications Supply Part Numbers and Storage Supply listProper storage TD Cartridge Replacement Moving InstructionsIndex NamesPacked components Paper Loading Special Memo Memo For users in the USA Sharp Electronics Corporation