Sharp AL-1451 operation manual Status Indicators, Indication Cause and remedy See

STATUS INDICATORS

When the following indicators light up or blink on the operation panel or the following alphanumeric codes appear in the display, solve the problem immediately referring to both the table below and the relevant page.

Be sure to use only genuine SHARP parts and supplies.

Indication		Cause and remedy	See
			page:
	Steadily	Replacement of drum cartridge will be needed	43
Drum replacement	lit	soon. Prepare a new cartridge.
required indicator
	Blinking	Drum cartridge must be replaced. Replace it	28
		with a new one.
TD cartridge	Steadily	Replacement of TD cartridge will be needed	43
	lit	soon. Prepare a new cartridge.
replacement
		TD cartridge must be replaced. Replace it with	27
required indicator	Blinking
		a new one.
		A misfeed has occurred. Remove the misfed	33
Misfeed indicator	Blinking	paper referring to the description of "Misfeed
		removal."
SPF misfeed	Blinking	An original misfeed has occurred in the SPF.	37
		Remove the misfed originals referring to the
indicator
		description of “Misfeed in the SPF”.
“CH” is blinking in the display.		The TD cartridge is not installed. Check if the	27
		cartridge is installed.
“CH” is steadily lit in the		Side cover is open. Close the side cover	–
		securely by pressing the round projections
display.
		near the side cover open button.
		Paper tray or bypass tray is empty. Load copy	13
		paper.
“P” is blinking in the display.
		A misfeed has occurred in the paper tray or	33
		bypass tray. Remove the misfed paper.
		Paper tray is not securely installed. Push the	–
		tray in securely.
		The copier will not function. Turn the power	–
A letter and a number appear		switch off, remove the power cord from the
alternately.		outlet, and contact our Technical Assistance
		Department at 1-(630)378-3590 in the USA or
		1-877-SHARP-CC (toll free)/905-568-7140 in
		Canada.

6

Copier trouble?

39