Sharp MX-7001N, MX-6200N, MX-7000N, MX-5500N, MX-6201N specifications Problems related to copy results

Problem

Point to check

Solution

The image is too light

Is the image too light or too dark?

Select an appropriate exposure mode for the original

or too dark.

being copied and adjust the exposure level manually.

Has an appropriate exposure mode for

Select one of the following modes depending on the

the original type been selected?

original type.

• Text

Use this mode for regular text documents.

• Text/Prtd.Photo

This mode provides the best balance for copying an

original which contains both text and printed

photographs, such as a magazine or catalogue.

• Text/Photo

This mode provides the best balance for copying an

original which contains both text and photographs,

such as a text document with a photo pasted on.

• Printed Photo

This mode is best for copying printed photographs,

such as photos in a magazine or catalogue.

• Photo

Use this mode to copy photos.

• Map

This mode is best for copying the light colour shading

and fine text found on most maps.

• Light original

Use this mode for originals with light pencil writing.

Colours are off.

Did you perform "Registration

Ask your administrator to perform "Registration

Adjustment"?

Adjustment".

➞ System Settings (Administrator) > "Device Control" >

"Other Settings" > "Registration Adjustment"

If the colour tones are off, perform "Auto Colour

Calibration". (If the colours are still off after calibration,

repeating calibration may improve the results.)

➞ System Settings (Administrator) > "Copy Function

Settings" > "Colour Adjustment" > "Auto Colour

Calibration"

Part of the image is

Has an appropriate ratio been selected

Select an appropriate ratio setting.

cut off.

for the original size and paper size?

Are you using an inch (AB) size

When copying an inch (AB) size original, specify the

original?

original size manually.

Copies come out

Is the original placed face up or face

When using the document glass, the original must be

blank.

down correctly?

placed face down. When using the automatic document

feeder, the original must be placed face up.