Sharp MX-6200N, MX-7000N, MX-5500N Plug and play, Screen does not, Appear USB, Connection, Windows

Problem

Point to check

Solution

The machine is not

Is your computer connected to the same

Windows:

detected (when

network as the machine?

If the machine and your computer are not connected

connected to a

to the same local area network, the machine will not

network).

be detected. If the two are connected to different

sub-networks, click the [Specify condition] button and

enter the machine's name (host name) or IP address

to search for the machine.

Macintosh:

If multiple AppleTalk zones exist, select the zone to

which the machine is connected from the menu.

Is the machine power on?

If the machine is powered off, it will not be detected.

Switch on the main power switch and the [POWER] key

(

) in that order. (In Windows, search again after

powering on the machine.)

Is your computer connected correctly to

Make sure that the cable is connected securely to the

the machine?

LAN connectors on your computer and the machine.

Check the connections at the hub as well.

☞ Illustration of the machine (Q) (page 70)

The plug and play

Is the machine power on?

When a USB cable is connected, make sure the power

screen does not

of the machine is "ON" and then connect a USB cable to

appear (USB

the machine. When the machine is not powered on,

connection in

switch on the main power switch and the [POWER] key

Windows).

(

) in that order.

Can your computer use a USB

Check your computer whether or not a USB interface

connection?

can be used on the Device Manager in your computer.

(For information on "Device Manager", see Help in

Windows.)

If USB can be used, your controller chipset type and

root hub will appear in "Universal Serial Bus controllers"

in "Device Manager". (The items that appear will vary

depending on your computer.)