Sharp AL-1215 operation manual Installing the Software, Flow of installation

Flow of installation

Refer to the following table and then begin installation.

Operating	Interface	Reference pages for how to install
system
Windows XP	USB/	Installing onto Windows XP (USB/parallel interface)
	Parallel	(p.21)
	USB	Installing onto Windows 98/Me/2000 (USB interface) (p.25)
Windows 98	Parallel	Installing onto Windows 95/98/Me/NT4.0/2000
		(Parallel interface) (p.28)
	USB	Installing onto Windows 98/Me/2000 (USB interface) (p.25)
Windows Me	Parallel	Installing onto Windows 95/98/Me/NT4.0/2000
		(Parallel interface) (p.28)
	USB	Installing onto Windows 98/Me/2000 (USB interface) (p.25)
Windows 2000
	Parallel	Installing onto Windows 95/98/Me/NT4.0/2000
		(Parallel interface) (p.28)
Windows 95/	Parallel	Installing onto Windows 95/98/Me/NT4.0/2000
NT 4.0		(Parallel interface) (p.28)
			4
INSTALLING THE SOFTWARE

The following term is used in this section.

MFP

Means the unit as a printer and scanner.

•For this description, it is assumed that the mouse is configured for

right hand operation.

• To print or scan, the MFP must be in the online state.

•The scanner feature only works when using a USB interface cable.

•If any error message appears, solve the problem following the instructions on the screen. After your problem is solved, the installing procedure will be continued. Depending on your problem, you may have to exit the installer. In this case, click the "Cancel" button to exit the installer. After solving your problem, reinstall the software from the beginning.

Installing onto Windows XP (USB/parallel interface)

Before starting the installation, make sure the USB or parallel interface cable is not connected to the MFP.

1

2

Insert the supplied CD-ROM into your CD-ROM drive.

Click the "start" button, click "My Computer" ( ), and then double-click the CD-ROM ( ) icon.

When any of "Found New Hardware Wizard" messages appear during the software installation, be sure to click the "Cancel" button.

21