Sharp AL-1215 operation manual Specific hazards None

Page 84
Handling Technical Measures Precautions
Safe Handling Advice
Storage
Technical Measures Storage Conditions

MATERIAL SAFETY DATA SHEET

Page: 2/4

Data Revised:

Jun.28.2002

Data Issued:

Jun. 1.1998

MSDS NO. F-30831

3. HAZARDS IDENTIFICATION

Most Important Hazards and Effects of the Products

Human Health Effects :There are no anticipated carcinogenic effects from exposure based on

 

animal tests performed using toner. When used as intended according to

 

instructions, studies do not indicate any symptoms of fibrosis will occur.

Environmental Effects :No data are available.

Specific hazards

:None

4. FIRST-AID MEASURES

Route(s) of Entry :Inhalation?

Skin?

Ingestion?

 

No

No

Possible but very unusual.

Inhalation

:Remove to fresh air. If symptoms occur, consult medical personnel.

Skin Contact

:Wash with soap and water for 15 minutes or until particle is removed.

Eye Contact

If irritation does occur, consult medical personnel.

:flush eyes immediately with water for 15 minutes. If irritation does occur,

Ingestion

consult medical personnel.

 

:Rinse with water and drink several glasses of water . If irritation or discomfort

 

does occur, consult medical personnel.

5. FIRE -FIGHTING MEASURES

Extinguishing Media

:water, CO2, foam and dry chemicals

Special Fire fighting Procedures:None

Fire and Explosion Hazards

:Like most finely divided organic powders, it may form an

 

explosive mixture.

6. ACCIDENTAL RELEASE MEASURES

Personal Precautions

:None

Environmental Precautions

:None

Methods for Cleaning Up

:Wipe off with paper or cloth. Do not use vacuum cleaner when a

large amount is released. It, like most finely divided organic powders, is capable of creating a dust explosion.

7. HANDLING AND STORAGE

:None

:None

:Use of a dust mask is recommended when handling a large quantity of toner or during long term exposure, as with any non-toxic dust. Try not to disperse the particles.

:None

:Keep container closed and Store in a cool and dry place. Keep out of the reach of children.

Incompatible Products:None

8. EXPOSURE CONTROL / PERSONAL PROTECTION

Engineering Measures

 

Ventilation

:None required with intended use.

Exposure limit values

:15mg/m3 (Total Dust) , 5mg/m3 (Respirable Dust)

OSHA-PEL (USA)

ACGIH-TLV (USA)

:10mg/m3 (Total Dust) , 3mg/m3 (Respirable Dust)

Image 84
Contents AL-1215 AL-1530CS AL-1540CS AL-1551CS For Your Protection Important points when selecting an installation site Do not install your unit in areas that areSafety precautions Trademark acknowledgementsContents Using the Manuals Online manual AL-1530CS, AL-1540CS, AL-1551CSConventions used in this manual and online manual Part Names SPF/RSPF AL-1540CS/1551CS Original coverAL-1215/1530CS Paper tray Single bypass AL-1215/1530CS/ 1540CS InterfaceOriginal to copy key and indicators AL-1551CS Operation PanelSetting UP the Unit Setup ProcedureChecking Packed Components and Accessories Preparing the Unit for InstallationRelease the scan head locking switch LockUnlockInstalling the TD Cartridge Page Power on About the scan headPower off methods Initial settings of operation panelAL-1551CS only Type of paper Type of media Size Weight Feeding PaperLoading the Paper Tray Gently push the paper tray back into the unit Multi-bypass tray AL-1551CS Open the multi-bypass tray and extend the trayUsing copy mode Using printer modeSingle bypass AL-1215/AL-1530CS/AL-1540CS Press the tray select key to select the multi-bypass traySoftware for the Sharp Personal MFP Series MFP driverSharpdesk Button ManagerBefore Installation Hardware and Software RequirementsMFP Driver Button Installing the Software Flow of installationInstalling onto Windows XP USB/parallel interface Operating Interface Reference pages for how to installDouble-click the setup icon Button Manager installer will start Begin installation of the scanner driver Begin installation of the printer driverInstalling onto Windows 98/Me/2000 USB interface Copying files for MFP driver installation Click the Close button when Windows 95/NT Establish the printer settings and click the Next button You have completed the installation of all the software Indicators on the Operation Panel Start indicatorOnline indicator Power save indicatorUsing the Printer Mode Opening the printer driver from the start menuHow to print Using the Scanner Mode Using the Button ManagerSetting up the Button Manager Windows 98/Me/2000 Properties screen, clickEvents tab Scan Button Destination Setting Dialog Box Flow of the Button Manager setting Scanner AL Event Using the Scanner key to begin scanning Press the Scanner keyPress the right copy quantity key to Application Application launched NumberOpening the scanner driver and scanning from your computer Press the start KeySelect Sharp Personal MFP Series, and click the Select Scanning with the Scanner and Camera Wizard in Windows XP Select a name, format, and folder for the scanned imageClick Finish in the screen that appears HOW to USE the Online Manual Installing Acrobat ReaderClick the to read the online manual Using Other Installed Drivers Connecting the Interface Cable Connecting the USB interface cableConnecting the parallel interface cable Obtain a shielded USB interface cableSelect the copy settings If you are using the single bypassCopy Flow Place the originalOriginal Placement Using the original tableAbout interrupt copying Using the SPF/RSPF Stream feeding modeOriginal feeder tray Exposure ADJUSTMENT/PHOTO Copying Exposure adjustmentPhoto mode SET the Copy QuantityAutomatic exposure adjustment REDUCTION/ENLARGEMENT/ZOOM Set the reduction/enlargement ratioTo select a zoom ratio About the Special Functions of AL-1551CS Two sided copyingMaking two-sided copies Selecting the tray Press the tray select keyToner Save Mode Description of Special FunctionsUser Programs Program Mode Parameters Displaying Total Number of CopiesTD Cartridge Replacement Gently pull the TD cartridge outWhile pressing the lock release Button Drum Cartridge Replacement Gently pull the cartridge out. DisposeCleaning the Unit CabinetOriginal table and the back side of the original cover/SPF Transfer charger Troubleshooting the Unit TroubleshootingStatus Indicators Indication Cause and remedyMisfeed Removal Paper feed area. p.66Misfeed in the paper feed area. p.64 Misfeed in the fusing area Misfeed in the paper feed areaLower the fusing unit release lever Misfeed in the transport areaOpen the front cover Rotate the feeding roller Direction of the arrowMisfeed in the lower paper feed area AL-1551CS Misfeed in the SPF/RSPFOpen the lower side cover under the multi-bypass AL-1551CS Specifications AppendixSharp GDI About Supplies and Options Supply listInterface cable Parallel interface cableMoving and Storing the Unit Moving instructionsProper storage Store the supplies in a location that isIndex Rspf SPFMFP driver Index by Purpose Software License Limited Warranty on Media Material Safety Data Sheet Hazards Identification Exposure Control / Personal Protection Ecological Information Data Revised Jun.28.2002 Data Issued Msds NO. F-30831 Specific hazards None Stability DOT USA For users in the USA Sharp Electronics Corporation