Sharp AL-1215 operation manual Stability

Page 85

 

MATERIAL SAFETY DATA SHEET

 

Page: 3/4

 

 

 

Data Revised:

Jun.28.2002

 

 

 

Data Issued:

Jun. 1.1998

 

 

 

MSDS NO. F-30831

 

Personal Protective Equipment

 

 

 

 

Respiratory Protection

:Not required under intended use.

 

 

 

Hand Protection

:Not required under intended use.

 

 

 

Eye Protection

:Not required under intended use.

 

 

 

Skin Protection

:Not required under intended use.

 

 

 

Other Protective equipment

:Use of a dust mask and goggles are recommended when

 

 

handling a large quantity of toner or during long term exposure,

 

 

as with any non-toxic dust.

 

 

 

 

 

 

 

9.

PHYSICAL AND CHEMICAL PROPERTIES

 

 

 

 

Appearance

 

 

 

 

 

Physical State : Solid

Form: Powder

Color: Black

Odor: odorless

 

Ph

:Not applicable

 

 

 

 

Boiling/Melting Point

:Not applicable

 

 

 

 

Flash Point (°C )

:Not applicable

 

 

 

 

Explosion Properties

:No data

 

 

 

 

Density (g/cm3)

:5.4 (bulk density : 2.09)

 

 

 

 

Solubility in water

:Negligible

 

 

 

 

 

 

 

 

10.

STABILITY AND REACTIVITY

 

 

 

 

Stability

:Stable

 

 

 

 

Hazardous Reactions

:Dust explosion, like most finely divided organic powders.

 

Conditions to avoid

:Electric discharge, throwing into fire.

 

 

 

Materials to avoid

:Oxidizing Materials

 

 

 

Hazardous Decomposition Products :CO, CO2 and NOX

 

 

 

Further Information

:None

 

 

 

11.TOXICOLOGICAL INFORMATION

Acute Toxicity

Ingestion (oral)

:LD50>2000mg/kg (Rats) (Estimated from the constituent components)

Dermal

:LD50>2000mg/kg (Rats)

Inhalation

:No data

Eye irritation

:Not an irritant (Rabbits)

Skin irritation

:Not an irritant (Rabbits)

Skin sensitizer

:No sensitization

Mutagenicity

:Negative (Ames Test)

Carcinogenicity :In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human carcinogen). This classification is given to chemicals for which there is inadequate human evidence, but sufficient animal evidence on which to base an opinion of carcinogenicity. The classification is based upon the development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels that induce particle overload of the lung. Studies performed in animal models other than rats did not show any association between carbon black and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation containing carbon black demonstrated no association between toner exposure and tumor development in rats.

Chronic Effect :In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of the rats in the high concentration (16mg/m3) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle (4mg/m3) exposure group, but no pulmonary change was reported in the lowest (1mg/m3) exposure group, the most relevant level to potential human exposures.

Image 85
Contents AL-1215 AL-1530CS AL-1540CS AL-1551CS For Your Protection Do not install your unit in areas that are Important points when selecting an installation siteTrademark acknowledgements Safety precautionsContents Online manual AL-1530CS, AL-1540CS, AL-1551CS Using the ManualsConventions used in this manual and online manual SPF/RSPF AL-1540CS/1551CS Original cover Part NamesAL-1215/1530CS Paper tray Single bypass AL-1215/1530CS/ 1540CS InterfaceOperation Panel Original to copy key and indicators AL-1551CSSetup Procedure Setting UP the UnitPreparing the Unit for Installation Checking Packed Components and AccessoriesLockUnlock Release the scan head locking switchInstalling the TD Cartridge Page About the scan head Power onInitial settings of operation panel Power off methodsAL-1551CS only Paper Type of paper Type of media Size Weight FeedingLoading the Paper Tray Gently push the paper tray back into the unit Open the multi-bypass tray and extend the tray Multi-bypass tray AL-1551CSUsing printer mode Using copy modeSingle bypass AL-1215/AL-1530CS/AL-1540CS Press the tray select key to select the multi-bypass trayMFP driver Software for the Sharp Personal MFP SeriesSharpdesk Button ManagerHardware and Software Requirements Before InstallationMFP Driver Button Flow of installation Installing the SoftwareInstalling onto Windows XP USB/parallel interface Operating Interface Reference pages for how to installDouble-click the setup icon Button Manager installer will start Begin installation of the printer driver Begin installation of the scanner driverInstalling onto Windows 98/Me/2000 USB interface Copying files for MFP driver installation Click the Close button when Windows 95/NT Establish the printer settings and click the Next button You have completed the installation of all the software Start indicator Indicators on the Operation PanelOnline indicator Power save indicatorOpening the printer driver from the start menu Using the Printer ModeHow to print Using the Button Manager Using the Scanner ModeSetting up the Button Manager Properties screen, click Windows 98/Me/2000Events tab Scan Button Destination Setting Dialog Box Flow of the Button Manager setting Scanner AL Event Press the Scanner key Using the Scanner key to begin scanningPress the right copy quantity key to Application Application launched NumberPress the start Key Opening the scanner driver and scanning from your computerSelect Sharp Personal MFP Series, and click the Select Select a name, format, and folder for the scanned image Scanning with the Scanner and Camera Wizard in Windows XPClick Finish in the screen that appears Installing Acrobat Reader HOW to USE the Online ManualClick the to read the online manual Using Other Installed Drivers Connecting the USB interface cable Connecting the Interface CableConnecting the parallel interface cable Obtain a shielded USB interface cableIf you are using the single bypass Select the copy settingsCopy Flow Place the originalUsing the original table Original PlacementAbout interrupt copying Stream feeding mode Using the SPF/RSPFOriginal feeder tray Exposure adjustment Exposure ADJUSTMENT/PHOTO CopyingPhoto mode SET the Copy QuantityAutomatic exposure adjustment Set the reduction/enlargement ratio REDUCTION/ENLARGEMENT/ZOOMTo select a zoom ratio Two sided copying About the Special Functions of AL-1551CSMaking two-sided copies Press the tray select key Selecting the trayDescription of Special Functions Toner Save ModeUser Programs Displaying Total Number of Copies Program Mode ParametersGently pull the TD cartridge out TD Cartridge ReplacementWhile pressing the lock release Button Gently pull the cartridge out. Dispose Drum Cartridge ReplacementCabinet Cleaning the UnitOriginal table and the back side of the original cover/SPF Transfer charger Troubleshooting Troubleshooting the UnitIndication Cause and remedy Status IndicatorsPaper feed area. p.66 Misfeed RemovalMisfeed in the paper feed area. p.64 Misfeed in the paper feed area Misfeed in the fusing areaMisfeed in the transport area Lower the fusing unit release leverOpen the front cover Rotate the feeding roller Direction of the arrowMisfeed in the SPF/RSPF Misfeed in the lower paper feed area AL-1551CSOpen the lower side cover under the multi-bypass AL-1551CS Appendix SpecificationsSharp GDI Supply list About Supplies and OptionsInterface cable Parallel interface cableMoving instructions Moving and Storing the UnitProper storage Store the supplies in a location that isRspf SPF IndexMFP driver Index by Purpose Software License Limited Warranty on Media Material Safety Data Sheet Hazards Identification Exposure Control / Personal Protection Ecological Information Data Revised Jun.28.2002 Data Issued Msds NO. F-30831 Specific hazards None Stability DOT USA For users in the USA Sharp Electronics Corporation