Sharp AL-1215 operation manual Cleaning the Unit, Cabinet

Page 61

4

5

Gently install the TD cartridge. To install the TD cartridge, see "INSTALLING THE TD CARTRIDGE" (p.10).

Close the front cover and then the side cover by pressing the round projections near the side cover open button. The drum replacement required () indicator will go out and the start () indicator will light up.

When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged.

CLEANING THE UNIT

Proper care is essential in order to get clean, sharp copies. Be sure to take a few minutes to regularly clean the unit.

• Before cleaning, be sure to turn the power switch off and remove the power cord from the outlet.

• Do not use thinner, benzene or other volatile cleaning agents. Doing so may cause deformation, discoloration, deterioration or malfunction.

Cabinet

Wipe the cabinet with a soft, clean cloth.

Original table and the back side of the original cover/SPF/

RSPF

Stains on the glass, SPF/RSPF scanning window (AL-1540CS/AL-1551CS), cover or SPF/RSPF roller will also be copied. Wipe the glass,SPF/RSPF scanning window, cover and SPF/RSPF roller with a soft, clean cloth. If necessary, dampen the cloth with a glass cleaner.

Original table/scanning window

Original cover/SPF/RSPF

7

 

SPF/RSPF roller

SPF/RSPF

Scanning window

59

Image 61
Contents AL-1215 AL-1530CS AL-1540CS AL-1551CS For Your Protection Do not install your unit in areas that are Important points when selecting an installation siteTrademark acknowledgements Safety precautionsContents Online manual AL-1530CS, AL-1540CS, AL-1551CS Using the ManualsConventions used in this manual and online manual SPF/RSPF AL-1540CS/1551CS Original cover Part NamesAL-1215/1530CS Paper tray Single bypass AL-1215/1530CS/ 1540CS InterfaceOperation Panel Original to copy key and indicators AL-1551CSSetup Procedure Setting UP the UnitPreparing the Unit for Installation Checking Packed Components and AccessoriesLockUnlock Release the scan head locking switchInstalling the TD Cartridge Page About the scan head Power onInitial settings of operation panel Power off methodsAL-1551CS only Paper Type of paper Type of media Size Weight FeedingLoading the Paper Tray Gently push the paper tray back into the unit Open the multi-bypass tray and extend the tray Multi-bypass tray AL-1551CSUsing printer mode Using copy modeSingle bypass AL-1215/AL-1530CS/AL-1540CS Press the tray select key to select the multi-bypass trayMFP driver Software for the Sharp Personal MFP SeriesSharpdesk Button ManagerHardware and Software Requirements Before InstallationMFP Driver Button Flow of installation Installing the SoftwareInstalling onto Windows XP USB/parallel interface Operating Interface Reference pages for how to installDouble-click the setup icon Button Manager installer will start Begin installation of the printer driver Begin installation of the scanner driverInstalling onto Windows 98/Me/2000 USB interface Copying files for MFP driver installation Click the Close button when Windows 95/NT Establish the printer settings and click the Next button You have completed the installation of all the software Start indicator Indicators on the Operation PanelOnline indicator Power save indicatorOpening the printer driver from the start menu Using the Printer ModeHow to print Using the Button Manager Using the Scanner ModeSetting up the Button Manager Properties screen, click Windows 98/Me/2000Events tab Scan Button Destination Setting Dialog Box Flow of the Button Manager setting Scanner AL Event Press the Scanner key Using the Scanner key to begin scanningPress the right copy quantity key to Application Application launched NumberPress the start Key Opening the scanner driver and scanning from your computerSelect Sharp Personal MFP Series, and click the Select Select a name, format, and folder for the scanned image Scanning with the Scanner and Camera Wizard in Windows XPClick Finish in the screen that appears Installing Acrobat Reader HOW to USE the Online ManualClick the to read the online manual Using Other Installed Drivers Connecting the USB interface cable Connecting the Interface CableConnecting the parallel interface cable Obtain a shielded USB interface cableIf you are using the single bypass Select the copy settingsCopy Flow Place the originalUsing the original table Original PlacementAbout interrupt copying Stream feeding mode Using the SPF/RSPFOriginal feeder tray Exposure adjustment Exposure ADJUSTMENT/PHOTO CopyingPhoto mode SET the Copy QuantityAutomatic exposure adjustment Set the reduction/enlargement ratio REDUCTION/ENLARGEMENT/ZOOMTo select a zoom ratio Two sided copying About the Special Functions of AL-1551CSMaking two-sided copies Press the tray select key Selecting the trayDescription of Special Functions Toner Save ModeUser Programs Displaying Total Number of Copies Program Mode ParametersGently pull the TD cartridge out TD Cartridge ReplacementWhile pressing the lock release Button Gently pull the cartridge out. Dispose Drum Cartridge ReplacementCabinet Cleaning the UnitOriginal table and the back side of the original cover/SPF Transfer charger Troubleshooting Troubleshooting the UnitIndication Cause and remedy Status IndicatorsPaper feed area. p.66 Misfeed RemovalMisfeed in the paper feed area. p.64 Misfeed in the paper feed area Misfeed in the fusing areaMisfeed in the transport area Lower the fusing unit release leverOpen the front cover Rotate the feeding roller Direction of the arrowMisfeed in the SPF/RSPF Misfeed in the lower paper feed area AL-1551CSOpen the lower side cover under the multi-bypass AL-1551CS Appendix SpecificationsSharp GDI Supply list About Supplies and OptionsInterface cable Parallel interface cableMoving instructions Moving and Storing the UnitProper storage Store the supplies in a location that isRspf SPF IndexMFP driver Index by Purpose Software License Limited Warranty on Media Material Safety Data Sheet Hazards Identification Exposure Control / Personal Protection Ecological Information Data Revised Jun.28.2002 Data Issued Msds NO. F-30831 Specific hazards None Stability DOT USA For users in the USA Sharp Electronics Corporation