Sharp AL-1215 operation manual Exposure Control / Personal Protection

Page 81

MATERIAL SAFETY DATA SHEET

Page: 3/4

Data Revised:

Jun.28.2002

Data Issued:

Jun. 1.1998

MSDS NO. F-00831

8. EXPOSURE CONTROL / PERSONAL PROTECTION

Engineering Measures

 

Ventilation

:None required with intended use.

Exposure limit values

:15mg/m3 (Total Dust) , 5mg/m3 (Respirable Dust)

OSHA-PEL (USA)

ACGIH-TLV (USA)

:10mg/m3 (Total Dust) , 3mg/m3 (Respirable Dust)

Personal Protective Equipment

Respiratory Protection

:Not required under intended use.

Hand Protection

:Not required under intended use.

Eye Protection

:Not required under intended use.

Skin Protection

:Not required under intended use.

Other Protective equipment

:Use of a dust mask and goggles are recommended when

 

handling a large quantity of toner or during long term exposure,

 

as with any non-toxic dust.

9. PHYSICAL AND CHEMICAL PROPERTIES

 

 

Appearance

 

 

 

Physical State : Solid

Form: Powder

Color: Black

Odor: odorless

Ph

:Not applicable

 

 

Boiling/Melting Point

:Not applicable

 

 

Softening Point (°C)

:No data

 

 

Flash Point (°C )

:Not applicable

 

 

Ignition Point (°C )

:No data

 

 

Explosion Properties

:No data

 

 

Density (g/cm3)

:1.1 (bulk density : 0.34)

 

 

Solubility in water

:Negligible

 

 

10. STABILITY AND REACTIVITY

Stability

:Stable

Hazardous Reactions

:Dust explosion, like most finely divided organic powders.

Conditions to avoid

:Electric discharge, throwing into fire.

Materials to avoid

:Oxidizing Materials

Hazardous Decomposition Products :CO, CO2 and NOX

Further Information

:None

11.TOXICOLOGICAL INFORMATION

Acute Toxicity

Ingestion (oral)

:LD50>2000mg/kg (Rats)

Dermal

:LD50>2000mg/kg (Rats)

Inhalation

:No data

Eye irritation

:Not an irritant

Skin irritation

:Not an irritant

Skin sensitizer

:No sensitization

Mutagenicity

:Negative (Ames Test)

Carcinogenicity :In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human carcinogen). This classification is given to chemicals for which there is inadequate human evidence, but sufficient animal evidence on which to base an opinion of carcinogenicity. The classification is based upon the development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels that induce particle overload of the lung. Studies performed in animal models other than rats did not show any association between carbon black and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation containing carbon black demonstrated no association between toner exposure and tumor development in rats.

Page 80 Page 82
Image 81
Page 80 Page 82
Contents AL-1215 AL-1530CS AL-1540CS AL-1551CS For Your Protection Do not install your unit in areas that are Important points when selecting an installation siteTrademark acknowledgements Safety precautionsContents Using the Manuals Online manual AL-1530CS, AL-1540CS, AL-1551CSConventions used in this manual and online manual SPF/RSPF AL-1540CS/1551CS Original cover Part NamesAL-1215/1530CS Paper tray Single bypass AL-1215/1530CS/ 1540CS InterfaceOperation Panel Original to copy key and indicators AL-1551CSSetup Procedure Setting UP the UnitPreparing the Unit for Installation Checking Packed Components and AccessoriesLockUnlock Release the scan head locking switchInstalling the TD Cartridge Page About the scan head Power onPower off methods Initial settings of operation panelAL-1551CS only Paper Type of paper Type of media Size Weight FeedingLoading the Paper Tray Gently push the paper tray back into the unit Open the multi-bypass tray and extend the tray Multi-bypass tray AL-1551CSUsing printer mode Using copy modeSingle bypass AL-1215/AL-1530CS/AL-1540CS Press the tray select key to select the multi-bypass trayMFP driver Software for the Sharp Personal MFP SeriesSharpdesk Button ManagerBefore Installation Hardware and Software RequirementsMFP Driver Button Flow of installation Installing the SoftwareInstalling onto Windows XP USB/parallel interface Operating Interface Reference pages for how to installDouble-click the setup icon Button Manager installer will start Begin installation of the printer driver Begin installation of the scanner driverInstalling onto Windows 98/Me/2000 USB interface Copying files for MFP driver installation Click the Close button when Windows 95/NT Establish the printer settings and click the Next button You have completed the installation of all the software Start indicator Indicators on the Operation PanelOnline indicator Power save indicatorOpening the printer driver from the start menu Using the Printer ModeHow to print Using the Scanner Mode Using the Button ManagerSetting up the Button Manager Windows 98/Me/2000 Properties screen, clickEvents tab Scan Button Destination Setting Dialog Box Flow of the Button Manager setting Scanner AL Event Press the Scanner key Using the Scanner key to begin scanningPress the right copy quantity key to Application Application launched NumberPress the start Key Opening the scanner driver and scanning from your computerSelect Sharp Personal MFP Series, and click the Select Scanning with the Scanner and Camera Wizard in Windows XP Select a name, format, and folder for the scanned imageClick Finish in the screen that appears HOW to USE the Online Manual Installing Acrobat ReaderClick the to read the online manual Using Other Installed Drivers Connecting the USB interface cable Connecting the Interface CableConnecting the parallel interface cable Obtain a shielded USB interface cableIf you are using the single bypass Select the copy settingsCopy Flow Place the originalOriginal Placement Using the original tableAbout interrupt copying Using the SPF/RSPF Stream feeding modeOriginal feeder tray Exposure adjustment Exposure ADJUSTMENT/PHOTO CopyingPhoto mode SET the Copy QuantityAutomatic exposure adjustment REDUCTION/ENLARGEMENT/ZOOM Set the reduction/enlargement ratioTo select a zoom ratio About the Special Functions of AL-1551CS Two sided copyingMaking two-sided copies Press the tray select key Selecting the trayDescription of Special Functions Toner Save ModeUser Programs Displaying Total Number of Copies Program Mode ParametersTD Cartridge Replacement Gently pull the TD cartridge outWhile pressing the lock release Button Gently pull the cartridge out. Dispose Drum Cartridge ReplacementCleaning the Unit CabinetOriginal table and the back side of the original cover/SPF Transfer charger Troubleshooting Troubleshooting the UnitIndication Cause and remedy Status IndicatorsMisfeed Removal Paper feed area. p.66Misfeed in the paper feed area. p.64 Misfeed in the paper feed area Misfeed in the fusing areaMisfeed in the transport area Lower the fusing unit release leverOpen the front cover Rotate the feeding roller Direction of the arrowMisfeed in the lower paper feed area AL-1551CS Misfeed in the SPF/RSPFOpen the lower side cover under the multi-bypass AL-1551CS Appendix SpecificationsSharp GDI Supply list About Supplies and OptionsInterface cable Parallel interface cableMoving instructions Moving and Storing the UnitProper storage Store the supplies in a location that isRspf SPF IndexMFP driver Index by Purpose Software License Limited Warranty on Media Material Safety Data Sheet Hazards Identification Exposure Control / Personal Protection Ecological Information Data Revised Jun.28.2002 Data Issued Msds NO. F-30831 Specific hazards None Stability DOT USA For users in the USA Sharp Electronics Corporation
Top Page Image Contents