Sharp AL-1215 operation manual Scanner AL Event

Page 40

All About The Windows Event Manager and scanner events in Windows 98, Windows Me, Windows 2000 and Windows XP.

Windows Platforms provide a mechanism for software to handle external events for a scanner device like the SHARP AL-xxxx (where xxxx is the model name of your unit) series products. This mechanism is controlled by the device manager on a device basis. Applications that can handle events from a scanner/camera device register with the Windows Event Manager and shown as available in the registered applications. The path an event takes to get to the user's selected application depends upon the event settings for the device.

Scanner AL-		Event		Event		User selects
xxxx (where		Manager		Manager		an
xxxx is the				selection		application.
model name		Windows OS		dialog
model name		Windows OS		dialog
of your unit)						The user
SCANNER				Displayed on		application
key pressed.				screen		opens.

This is the Windows Event Manager Selection Dialog.

Shown are two applications registered to handle the scanner event from the AL-xxxx (where xxxx is the model name of your unit) device.

38

Image 40

Contents AL-1215 AL-1530CS AL-1540CS AL-1551CS For Your Protection Important points when selecting an installation site Do not install your unit in areas that areSafety precautions Trademark acknowledgementsContents Online manual AL-1530CS, AL-1540CS, AL-1551CS Using the ManualsConventions used in this manual and online manual Part Names SPF/RSPF AL-1540CS/1551CS Original coverAL-1215/1530CS Paper tray Single bypass AL-1215/1530CS/ 1540CS InterfaceOriginal to copy key and indicators AL-1551CS Operation PanelSetting UP the Unit Setup ProcedureChecking Packed Components and Accessories Preparing the Unit for InstallationRelease the scan head locking switch LockUnlockInstalling the TD Cartridge Page Power on About the scan headInitial settings of operation panel Power off methodsAL-1551CS only Type of paper Type of media Size Weight Feeding PaperLoading the Paper Tray Gently push the paper tray back into the unit Multi-bypass tray AL-1551CS Open the multi-bypass tray and extend the trayUsing copy mode Using printer modeSingle bypass AL-1215/AL-1530CS/AL-1540CS Press the tray select key to select the multi-bypass traySoftware for the Sharp Personal MFP Series MFP driverSharpdesk Button ManagerHardware and Software Requirements Before InstallationMFP Driver Button Installing the Software Flow of installationInstalling onto Windows XP USB/parallel interface Operating Interface Reference pages for how to installDouble-click the setup icon Button Manager installer will start Begin installation of the scanner driver Begin installation of the printer driverInstalling onto Windows 98/Me/2000 USB interface Copying files for MFP driver installation Click the Close button when Windows 95/NT Establish the printer settings and click the Next button You have completed the installation of all the software Indicators on the Operation Panel Start indicatorOnline indicator Power save indicatorUsing the Printer Mode Opening the printer driver from the start menuHow to print Using the Button Manager Using the Scanner ModeSetting up the Button Manager Properties screen, click Windows 98/Me/2000Events tab Scan Button Destination Setting Dialog Box Flow of the Button Manager setting Scanner AL Event Using the Scanner key to begin scanning Press the Scanner keyPress the right copy quantity key to Application Application launched NumberOpening the scanner driver and scanning from your computer Press the start KeySelect Sharp Personal MFP Series, and click the Select Select a name, format, and folder for the scanned image Scanning with the Scanner and Camera Wizard in Windows XPClick Finish in the screen that appears Installing Acrobat Reader HOW to USE the Online ManualClick the to read the online manual Using Other Installed Drivers Connecting the Interface Cable Connecting the USB interface cableConnecting the parallel interface cable Obtain a shielded USB interface cableSelect the copy settings If you are using the single bypassCopy Flow Place the originalUsing the original table Original PlacementAbout interrupt copying Stream feeding mode Using the SPF/RSPFOriginal feeder tray Exposure ADJUSTMENT/PHOTO Copying Exposure adjustmentPhoto mode SET the Copy QuantityAutomatic exposure adjustment Set the reduction/enlargement ratio REDUCTION/ENLARGEMENT/ZOOMTo select a zoom ratio Two sided copying About the Special Functions of AL-1551CSMaking two-sided copies Selecting the tray Press the tray select keyToner Save Mode Description of Special FunctionsUser Programs Program Mode Parameters Displaying Total Number of CopiesGently pull the TD cartridge out TD Cartridge ReplacementWhile pressing the lock release Button Drum Cartridge Replacement Gently pull the cartridge out. DisposeCabinet Cleaning the UnitOriginal table and the back side of the original cover/SPF Transfer charger Troubleshooting the Unit TroubleshootingStatus Indicators Indication Cause and remedyPaper feed area. p.66 Misfeed RemovalMisfeed in the paper feed area. p.64 Misfeed in the fusing area Misfeed in the paper feed areaLower the fusing unit release lever Misfeed in the transport areaOpen the front cover Rotate the feeding roller Direction of the arrowMisfeed in the SPF/RSPF Misfeed in the lower paper feed area AL-1551CSOpen the lower side cover under the multi-bypass AL-1551CS Specifications AppendixSharp GDI About Supplies and Options Supply listInterface cable Parallel interface cableMoving and Storing the Unit Moving instructionsProper storage Store the supplies in a location that isIndex Rspf SPFMFP driver Index by Purpose Software License Limited Warranty on Media Material Safety Data Sheet Hazards Identification Exposure Control / Personal Protection Ecological Information Data Revised Jun.28.2002 Data Issued Msds NO. F-30831 Specific hazards None Stability DOT USA For users in the USA Sharp Electronics Corporation