Using the SHARP TWAIN
1Place the original you wish to scan on the original table/SPF/RSPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT" (p.47).
2
3
After starting Sharpdesk, click the "File" menu and select "Select Scanner".
| Click here |
Select "SHARP Personal MFP |
|
Series", and click the "Select" | Click here |
button. |
If you use more than one scanning device, select the scanner you want to use through the application. The method for accessing the "Select Scanner" option, depends upon the application. For more information, see the online manual or the help file of your application.
4Select "Acquire Image" from the "File" menu, or click the "Acquire" button ( 
) .
5Set the configuration for scanning (refer to the online manual and help file), and click the "Scan" button.
Scan is started.
40