Sharp AL-1456, AL-1555, AL-1045, AL-1255 operation manual Setting UP the Unit, Setup Procedure

Page 9

2

SETTING UP THE UNIT

 

Follow the installation procedure below to use the unit properly.

If the unit does not function properly during setup or use, or if a function cannot be used, see "TROUBLESHOOTING THE UNIT" (p.61).

 

2

 

SETUP PROCEDURE

When using the unit for the first time, setup the unit following the procedure shown below.

1Open the package, and make sure that all the accessories are supplied with the unit. (p.8)

2Remove the protective materials. (p.9)

3Install the TD cartridge. (p.10)

4Load the paper in the paper tray (p.15) or the multi-bypass tray*2 . (p.17)

5Plug the other end of the power cord into the nearest outlet. (p.12)

6Install the software.*1 (p.19)

7Connect the interface cable*1 (p.45) and turn on the unit. (p.12)

8Now, you can copy (p.46), print (p.32), or scan (p.34) your document.

*1

If you are only using the unit for copying, skip this step.

*2

The multi-bypass tray is only included with the AL-1555.

7

Image 9
Contents AL-1045 AL-1255 AL-1456 AL-1555 Varoitus Do not install your unit in areas that are Important points when selecting an installation siteBe sure to allow the required space around the machine For servicing and proper ventilationTrademark acknowledgements Safety precautionsContents Using the Manuals Online manualConventions used in this manual and online manual Part Names Original coverInterface Operation Panel Original to copy key and indicators AL-1555Setup Procedure Setting UP the UnitPreparing the Unit for Installation Checking Packed Components and AccessoriesLockUnlock Release the scan head locking switchInstalling the TD Cartridge Page About the scan head Power onPower off methods Initial settings of operation panelAL-1555 only Paper Type of paper Type of media Size Weight FeedingLoading the Paper Tray Gently push the paper tray back into the unit Multi-bypass tray AL-1555 Open the multi-bypass tray and extend the trayPress the tray select key to select the multi-bypass tray Using copy mode Using printer modeSingle bypass AL-1045/AL-1255/AL-1456 Hardware and Software Requirements Software for the Sharp Personal MFP SeriesMFP driver SharpdeskFlow of installation Before InstallationOperating Interface Reference pages for how to install MFP Driver ButtonInstalling the Software Installing onto Windows XP USB/parallel interfaceDouble-click the Setup icon Button Manager installer will start Setup program will start to copy the files Begin installation of the printer driver Begin installation of the scanner driverInstalling onto Windows 98/Me/2000 USB interface Copying files for MFP driver installation Connect the USB interface cable. p.45 Click the Close button whenWindows 95/NT Establish the printer settings and click the Next button Connect the parallel interface cable Start indicator Indicators on the Operation PanelOn Line indicator Power save indicatorUsing the Printer Mode Opening the printer driver from the start menuClick the Printing Preferences button in the General tab Tray How to printUsing the Scanner Mode Using the Button ManagerSetting up the Button Manager Windows 98/Me/2000 Properties screen, clickEvents tab Scan Parameter Settings Dialog Box Flow of the Button Manager setting Press the Scanner key Using the Scanner key to begin scanningOpening the scanner driver and scanning from your computer Press the start keyApplication Application launched Number Select Sharp Personal MFP Series, and click the Select ButtonClick here Scanning with the Scanner and Camera Wizard in Windows XP For information on the settings, seeSelect a name, format, and folder for the scanned image Click Finish in the screen that appearsClick the to read the online manual HOW to USE the Online ManualInstalling Acrobat Reader Using Other Installed Drivers Connecting the USB interface cable Connecting the Interface CableConnecting the parallel interface cable Obtain a shielded USB interface cableScan Once / Print Many Copy FlowStart copying Original Placement Using the original tableAbout interrupt copying Using the SPF/RSPF Stream feeding modeOriginal feeder tray Exposure ADJUSTMENT/PHOTO Copying Exposure adjustmentSET the Copy Quantity Automatic exposure adjustment REDUCTION/ENLARGEMENT/ZOOM Set the reduction/enlargement ratioTo select a zoom ratio Two sided copying About the Special Functions of the AL-1555Selecting the tray How to select the trayDescription of Special Functions Toner Save ModeFeeding mode and resolution of Auto & Manual mode Setting the power save modes, auto clear time, streamCanceled as desired User ProgramsDisplaying Total Number of Copies Program Mode ParametersGently pull the TD cartridge out TD Cartridge ReplacementWhile pressing the lock release Button Lock release buttonGently pull the cartridge out. Dispose Drum Cartridge ReplacementCleaning the Unit CabinetOriginal table and the back side of the original cover/SPF Transfer charger Troubleshooting Troubleshooting the UnitIndication Cause and remedy Status IndicatorsMisfeed Removal Paper feed area. p.66Misfeed in the paper feed area. p.64 Lower the fusing unit release Misfeed in the fusing areaMisfeed in the paper feed area LeverMisfeed in the transport area Lower the fusing unit release leverOpen the front cover Rotate the feeding roller Direction of the arrowMisfeed in the SPF/RSPF Misfeed in the lower paper feed area AL-1456/AL-1555AL-1555 Appendix SpecificationsSharp GDI Supply list About Supplies and OptionsInterface cable Parallel interface cableMoving instructions Moving and Storing the UnitProper storage Store the supplies in a location that isDark key IndexMFP driver Index by Purpose Software License Limited Warranty on Media Page Page Page Page Page Page Page Page GREEN-AND-YELLOW Sharp Corporation
Related manuals
Manual 89 pages 41.75 Kb