Sharp AL-1045, AL-1456, AL-1255 About the Special Functions of the AL-1555, Two sided copying

6 SPECIAL FUNCTIONS

This chapter describes the special functions of this unit. Use these functions as needed.

ABOUT THE SPECIAL FUNCTIONS OF THE AL-1555

Two sided copying

When copying from the RSPF, two-side originals can be copied automatically without having to manually turn them over. Automatic two-sided copying can also be performed without using the RSPF. When copying from one-sided originals to two- sided copies, copying orientation can be selected between Turn on Long Edge and Turn on Short Edge.

•When making two-sided copies from the original table, the paper size

must be A4, letter. When making two-sided copies from the RSPF, A4, B5, A5, letter, legal, and invoice sizes can be used. Non-standard size paper cannot be used.

•When making two-sided copies, the multi-bypass tray cannot be used.

•When using two-sided invoice size originals from the RSPF, be sure to place them in the landscape orientation. Otherwise, an original misfeed will occur.

A A

A

A

A

A A

A

Turn on Long Edge

Turn on Short Edge

Making two-sided copies

1Place the original on the original table or in the RSPF. (see "ORIGINAL PLACEMENT" (p.47).

2Select two-sided copy mode.

52