Sharp AL-1555, AL-1456, AL-1045 Using the Scanner key to begin scanning, Press the Scanner key

All About The Windows Event Manager and scanner events in Windows 98, Windows Me, Windows 2000 and Windows XP.

Windows Platforms provide a mechanism for software to handle external events for a scanner device like the SHARP AL-xxxx (where xxxx is the model name of your unit) series products. This mechanism is controlled by the device manager on a device basis. Applications that can handle events from a scanner/camera device register with the Windows Event Manager and shown as available in the registered applications. The path an event takes to get to the user's selected application depends upon the event settings for the device.

Scanner AL-		Event Manager		Event Manager	User selects an
xxxx (where				selection dialog	application.
xxxx is the		Windows OS
model name of				Displayed on	The user
your unit)				screen	application
SCANNER key					opens.
pressed.
			This is the Windows Event Manager
	Event on device: SHARP AL-1555
			Selection Dialog.

Shown are 2 applications registered to handle the scanner event from the AL-xxxx (where xxxx is the model name of your unit) device.

Using the SCANNER key to begin scanning

•Scanning is not possible during a copy job.

• If the unit is used to begin a scan job during a print job using the parallel interface connection or the USB interface connection, the scan job will be stored and scanning will begin when the print job is completed.

• When scanning an original that has been placed in the SPF/RSPF, only one original can be placed unless you are using Sharpdesk.

1 Press the SCANNER ( ) key.

The unit enters scan mode.

38