Sharp AL-1045, AL-1555, AL-1456, AL-1255 Displaying Total Number of Copies, Program Mode Parameters

Program	Mode		Parameters
No.
1	Auto clear time	0	OFF, 1	10sec., 2	30sec.
		*3	60sec., 4	90sec., 5	120sec.
2	Preheat mode	*0	30sec., 1	60sec., 2	90sec.
3	Auto power shut- off	0	2min., *1	5min., 2	15min.
	timer	3	30min. 4	60 min. 5	120min.
4	Stream feeding	0	OFF, *1	ON
	mode
5	Auto power shut- off	0	OFF, *1	ON
	mode
6	Resolution of AUTO	*0	300dpi, 1	600dpi
	& MANUAL mode

* Factory default settings are indicated with an asterisk (*).

Program No. 4 can be selected on the AL-1255, AL-1456 and

AL-1555.

5Press the start () key. The right-hand number in the display will be steadily lit and the entered value will be stored.

To change the setting or to set another mode, press the clear () key. The unit will return to step 2.

6Press the light ( ) or dark ( ) key to return to the normal copy mode.

DISPLAYING TOTAL NUMBER OF COPIES

Use the following procedure to display the total number of copies.

1

2

Press the clear () key to reset the display to zero.

Press and hold down the clear () key for approximately 5 seconds. The total number of copies will appear in two steps, each with three digits.

Example: Total number of copies is 1,234.

56