2Press and hold down the exposure mode selector key for approximately 5 seconds.
The manual ( 
) indicator will go out
and the photo (
) indicator will begin to blink. The exposure indicator marked "5" will light up, indicating the standard toner mode is active.
3
4
To enter the toner save mode, press the light ( 
) key. The exposure indicator marked "1" will light up, indicating the toner save mode is selected.
Press the exposure mode selector key. The photo (
) indicator will stop blinking and the exposure indicator marked "3" will light up. The toner save mode is now active.
To return to the standard mode, repeat the procedure but use the dark (
) key to select exposure level "5" in step 3.
USER PROGRAMS
The user programs allow the parameters of certain functions to be set, changed, or
canceled as desired. | 6 |
Setting the power save modes, auto clear time, stream | |
feeding mode and resolution of AUTO & MANUAL mode |
|
1
2
3
4
Press and hold down the light ( 
) and dark ( 
) keys simultaneously for more than 5 seconds until all the alarm
indicators (
, 
, 
) blink and "
" appears in the display.
Use the left copy quantity (
) key to select a user program number (1: auto clear time, 2: preheat mode, 3: auto power
Press the start (
) key. The entered program number will be steadily lit and the currently selected parameter number for the program will blink on the right side of the display.
Select the desired parameter using the right copy quantity (
) key. The entered parameter number will blink on the right of the display.
55