Sharp XE-A401 125 £, PLU Price Look-Up and Subdepartment Programming, Function selection

2PLU (Price Look-Up) and Subdepartment Programming

The PLU function allows speedy key entries whereby a price is automatically called up when a code is entered. The subdepartment is a kind of “open PLU”, which requires you to enter a price after the PLU code is entered. A maximum of 1800 PLU/subdepartment settings are possible. Each one belongs to a department and acquires the department’s parameters (dept. type (normal or bottle return), dept. group, tax status, SICS and sign).

A commission group (0 to 2, 0: No commission is applied) can be assigned to each department for commission for clerks. Each commission amount for individual clerk is calculated based on the corresponding programmed commission rate and printed later on clerk reports.

The cash register is preprogrammed so all 1800 codes are assigned as PLUs (commission group: 0) associated with department 1 and preset unit price “0”.

Unit price and associated department assignment

		To program zero	*1
				D
	p
PLU code		*2 Unit price
		(max. six digits)
(1-1800)

Associated	A
Dept. key

*1: To assign departments 21 through 40, press the department shift key.

When the associated department is department 41-99:

To program zero

PLU code	p	Associated	d
		dept. code
(1-1800)		(1 to 99)

*2 Unit price	s A
(max. six digits)

*2: For a subdepartment, set the limit amount of unit price entry.

To program the following PLU, start from entering a unit price or an associated department code without pressing the Akey.

To program another PLU, start from the beginning without pressing the Akey.

Key operation example Print

1 p

125£

A

PLU code

To delete a PLU code, use the following sequence:

Unit price Associated dept.

PLU code pvA (1-1800)

To delete the following PLU

To delete another PLU

Function selection

To program “00”

PLU code p *AB sA (1-1800)

To program the following PLU

To program another PLU

34