TANDBERG GWData port Command Interface User Guide
|
| SNMP SystemLocation: <S: 0, 70> |
|
|
| or |
|
|
| SNMP HostIPAddr [1..3]: <IPAddr> |
|
|
|
| |
|
| parameters: |
|
|
| • Mode: < On/Off/ReadOnly/TrapsOnly > |
|
|
| • Community Name: Text string of maximum 16 characters. |
|
|
| • System Contact: Text string of maximum 70 characters |
|
|
| • System Location: Text string of maximum 70 characters |
|
|
| • Host IP Addr: The IP addresses of max 3 SNMP trap hosts |
|
|
|
| |
|
| • Mode enables or sets the mode of SNMP support |
|
|
| • Community Name is used to authenticate SNMP requests. |
|
|
| SNMP requests must have this ‘password’ in order to receive a |
|
|
| response from the SNMP agent in the gateway. |
|
|
| • System Contact, Used to identify the system contact via SNMP |
|
|
| tools such as HPOpenView or TANDBERG Management Suite |
|
|
| • System Location Used to identify system location via SNMP |
|
|
| tools such as HPOpenView or TANDBERG Management Suite |
|
|
| • Host IP Addr identifies the |
|
|
| Up to three different SNMP Trap Hosts can be defined. Your |
|
|
| LAN administrator should provide the correct values for these |
|
|
| fields |
|
|
| Example of SNMP feedback: |
|
|
| *c xConfiguration SNMP Mode: On |
|
|
| *c xConfiguration SNMP CommunityName: "public" |
|
|
| *c xConfiguration SNMP SystemContact: "" |
|
|
| *c xConfiguration SNMP SystemLocation: "" |
|
|
| *c xConfiguration SNMP HostIPAddr 1: "127.0.0.1" |
|
|
| *c xConfiguration SNMP HostIPAddr 2: "127.0.0.1" |
|
|
| *c xConfiguration SNMP HostIPAddr 3: "127.0.0.1" |
|
|
|
|
|
| SSH | Enables or disables SSH interface on the 3G GW |
|
|
| SSH Mode: <On/Off> |
|
|
|
| |
|
| Example of SSH feedback: |
|
|
| *c xConfiguration SSH Mode: On |
|
| TELNET | Enables or disables telnet interface on the 3G GW |
|
|
| Telnet Mode: <On/Off> |
|
|
|
| |
|
| Example of TELNET feedback: |
|
|
| *c xConfiguration Telnet Mode: On |
|
| SystemUnit | Sets the 3G GW name and password |
|
|
| SystemUnit Name: <S: 0, 50> |
|
|
| or |
|
|
| SystemUnit Password: <S: 0, 16> |
|
|
|
| |
|
| Parameters: |
|
|
| • Name: Text string of maximum 50 characters |
|
|
| • Password: Text string of maximum 16 characters |
|
|
|
|
|
|
| 12 |
|