TANDBERG D1320202 SystemLoad Call 1, Ntp, Status Address Port Last Update Last Correction

TANDBERG GWData port Command Interface User Guide

	Example of GatewayCall feedback:
	*s GatewayCall 1 (status=Inactive): /
	*s/end
	OK
	*s GatewayCall 1 (status=Active):
	CallRef 1: 1
	CallRef 2: 2
	*s/end
	OK
	xstat gatewaycall 1
	*s GatewayCall 1 (status=Active):
	CallRef 1: 1
	CallRef 2: 3
	*s/end
	OK
SystemLoad	Returns the current system load in percentage.
	SystemLoad
	Status format:
	SystemLoad <1..100>
Call [1 .. 360]	Displays the session legs within gateway calls. Every session can have a
	maximum of three legs: calling and called party and the phonebook or IVR menu.
	Call
	Parameters:
	• Status [1 .. 360], the status of the different session legs.
NTP	Returns the IP address of the NTP server.
	Status format:
	<Status>
	<Address>
	<Port>
	<Last Update>
	<Last Correction>
	---
	Parameters:
	• Status, indicates whether the NTP server is active or not.
	• Address, the IP address of the NTP server.
	• Port, is default 123.
	• LastUpdate, indicates the last update date and time.
	• Last Correction, the time correction in seconds.
	Example of NTP feedback:
	*s NTP (status=Active):
	Address: "131.188.3.220"
	Port: 123
	LastUpdate: "2006-04-10 15:21:14"
	26