TANDBERG T1 Upload certificates, Certificates upload procedure, How to upload the certificate

T1

Contents Introduction Getting started About the menus About the settings Settings Library Cameras

Administrator Guide

AppenAppendicesi Contact us

Upload certificates

The Upload certificates tab lets you upload a CA list (ROOT certificate) to authenticate TLS connections on SIP and a HTTPS certificate to enable HTTPS.

The system administrator issues/obtains and installs unique certificates to each system.

For TLS connections a ROOT Certificate (CA-list) can be uploaded from the web interface.

When the SIP setting TlsVerify is enabled, only TLS connections to servers, whom x.509 certificate is validated against the CA-list, will be allowed.

Go to: Settings > Administrator settings > Advanced configuration > SIP > Profile > TlsVerify

To install a certificate, you need:

•HTTPS certificate ( .PEM format)

•ROOT certificate ( .PEM format)

•Private key ( .PEM format)

•Passphrase (optional)

The certificates upload procedure

Contact your system administrator to obtain the required files (.PEM format).

How to upload the certificate

1.Open a web browser and enter the IP address to connect to the Codec C90 by HTTP.

2.Select the Upload certificates tab

3.Click Browse... and locate the certificate files (.PEM)

4.Type in the Passphrase

5.Click the Upload button to start the certificate installation.

D14274.01—NOVEMBER 2008 50