TANDBERG T1 manual Getting started, Chapter

Page 8

T1

ContentsIntroduction

Administrator Guide

	Gettinget ing startstarted	About the menus	About the settings	Settings Library	Cameras	Appendices	Contact us

Chapter 2

Getting started

This chapter introduces you to the codec and gets you up and going.

This guide has been divided into several chapters, all of which provide different information. You can access the chapters directly by clicking on the menu bar at the top of this page.

In this chapter...

System overview Cable configurations Using the remote control Turn on the system Verify IP address settings Setting a static IP address

Add the system to the network Verify your settings

Time zone settings

D14274.01—NOVEMBER 2008

8

Image 8

Contents Tandberg T1 NovemberTable of Contents What’s in this guide?This chapter IntroductionChapter Tandberg T1 at a glance Intellectual Property Rights TrademarkDisclaimer Patent InformationSafety Instructions Water and MoistureEnvironmental Issues TANDBERG’s Environmental PolicyGetting started System overview Cable configurations LANUsing the Remote Control BatteriesUsing the Remote Control, Call KEYIf you need to set a static IP address Verify IP address settingsTurn on the system Add the system to the network Verify your settingsTime zone settings About the menus Settings The Settings menu Administrator settings menuAbout the menus Home The Home menuSettings menu Explaining the administrator settingsAdministrator settings IP Settings menuAdvanced configuration menu SearchAdministrator Settings Library SIPAdvanced configuration menu Audio settingsAudio Output Hdmi 1, 3 Mode On/Off Audio Output Line 1. Mode On/OffAudio Input Line 1. Level Audio Input Line 1. Channel Left/Right/MonoCamera settings Conference settings Do not disturb setting Network settings Network services settings NetworkServices Snmp Mode Off/ReadOnly/ReadWrite NetworkServices Snmp CommunityName S 0NetworkServices Snmp SystemContact S 0 NetworkServices Snmp SystemLocation S 0Serial port settings Phone book server settingsProvisioning settings SIP Profile settings Standby settingsSystem unit settings Time zone settingVideo OSD Mode On/Off Video Input Source 2 Connector HDMI/HDSDI/YPbPrVideo Input Source 1. CameraControl Mode On/Off Video Input Source 1 Connector HDMI/HDSDI/YPbPrVideo Output Composite 5 Resolution PAL/NTSC Example Video Output Hdmi 1 ResolutionExample Video Output DVI 2 Resolution Example Video Output Composite 5 Resolution NtscCameras PrecisionHD 1080p camera Hdmi and HD-SDIKensington lock Cascaded camerasConnecting the camera Tandberg T1Tandberg TRC5 Using Best viewBest view-Face recognition Line voltage frequency DIP switch settings for video output formatsVideo output formats Cameras in daisy chain Appendices Tandberg DnamGeneral room guidelines Physical conditionsRoom equipment Environmental considerationsAudio quality Natural communicationBest audio quality to all participants Making eye contactGuidelines for the telepresence room setup Adjust the camera viewGeneral recommendations for the room layout Distance between the table and the video systemSharing a PC presentation Shows the PC presentation and the participantsGuidelines for the high end meeting room setup Camera viewAdministrator Guide Tandberg Remote Control TRC5 ArrowsConfigure the video inputs Administrator settingsAPI commands Video Input MatrixSoftware upgrade Software upgrade procedureUpload certificates Certificates upload procedureHow to upload the certificate Configuration CommandXML files View XML filesLog files Debug log filesDnam Loudspeaker Cabinet Dnam AmplifierNTP Time Zone expressions NTP Time Zone expressions, GMT+0 GMT0NZ-CHAT CETMedia capabilities supported in SIP Supported RFCs in SIPCurrent RFCs and drafts supported in SIP CE Declaration for Telepresence T1 China RoHS table Tandberg T1 dimensions Front viewLeft side view Top viewPrecisionHD 1080p camera dimensions PAL/NTSC Technical specificationsUnit Delivered Complete with HTTP, Https TCP/IP DhcpGpio Headquarters European Headquarters Tandberg