Runco VX-50d, VX-40d, VX-80d, VX-60d manual Picture Brightness Contrast Color Tint Sharpness

Operation

Table 4-1. Aspect Ratio Settings (continued)

	Remote
Aspect Ratio	Control		Description
	Key
Virtualwide 2.35	SVC			A 2.35 image is stretched
				anamorphically in both direc-
		2.35:1 Image on		tions to fill a 16:9 image. (The
		16:9 Screen		secondary anamorphic lens then
				“stretches” the image back to
				2.35:1.)
				Virtualwide 2.35 is available only
		2.35:1 Image on		on VX-40d/-50d/-60d/-80d pro-
		16:9 Screen with
		VirtualWide 2.35		jectors equipped with the Cine-
				Wide option.
		2.35:1 Image on
		2.35:1 Screen with
		VirtualWide 2.35

Use the controls in the Picture Menu to calibrate your VX-40d/-50d/-60d/-80d for optimum picture quality.

The VX-40d/-50d/-60d/-80d has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from Runco video display devices. Accordingly, Runco recommends that setup and calibration be performed by an ISF certified installation technician.

All signal types require separate processing. Therefore, you need to calibrate each DHD Controller input separately. Runco recommends calibrating the inputs in this order:

1.Component SD

2.S-Video 1 / S-Video 2

3.Composite

4.HD/RGB 1 / HD/RGB 2

5.DVI 1 / DVI 2

When you change a picture quality setting, save the change to a

Note preset afterwards. Otherwise, the change will be lost when a different input is selected. (Picture quality settings are saved for

each input separately.) For information about saving settings, refer to ISF Presets on page 66.

Picture

Picture

Brightness

Contrast

Color

Tint

Sharpness

Runco VX-40d/-50d/-60d/-80d Owner’s Operating Manual 61