Effects of Primary Color Hue Adjustments | Runco VX-6000D instruction

Operation

Table 4-3describes the effects of adjusting the primary color hues.

Table 4-3. Effects of Primary Color Hue Adjustments

Primary Color	Press to move the color...	Press to move the color...

Red	Closer to magenta	Closer to yellow

Yellow	Closer to red	Closer to green

Green	Closer to yellow	Closer to cyan

Cyan	Closer to green	Closer to blue

Blue	Closer to cyan	Closer to magenta

Magenta	Closer to blue	Closer to red

•Saturation: This slidebar adjusts the color saturation level – the amount of that color in a video image. Lower settings produce less saturated colors; a setting of “-30” removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic.

•Intensity: This slidebar adjusts the intensity – also known as luminance – of a given color.

•Default: To reset ALL ICC settings – Hue, Saturation AND Intensity of all six colors – for the currently-selected “Picture Memory“ preset to their factory-default values, select Default (directly below the “Intensity” menu item) from the ICC menu. Then, select Yes to confirm the reset.

To reset only the Hue, Saturation OR Intensity of all six colors for the currently-selected “Picture Memory“ preset to their factory-default values, select Hue, Saturation or Intensity from the ICC menu and press ENTER. Then, select Default (the last menu item) from the ICC menu. Then, select Yes to confirm the reset.

Brilliant Color™: Select Brilliant Color™ from the Advanced Picture Adjust menu to change the BrilliantColor setting. BrilliantColor utilizes a new color-processing algorithm and system level enhancements to enable higher picture brightness while providing truer, more vibrant colors. To enable BrilliantColor, set it to On; to disable it, set it to Off.

Video NR: To apply noise reduction to the input signal, select Video NR from the Advanced Picture Adjust menu. Noise reduction is useful for improving the signal-to-noise ratio of video signals. Set it to Off, 1, 2 or 3, as needed, keeping in mind that higher settings (which reduce high frequencies) may also “soften” the image.

MNR: Select MNR from the Picture Adjust menu to reduce or eliminate so-called “mosquito noise” in MPEG-compressed video signals (digital broadcasts or DVDs). Set it to Off, 1, 2 or 3, as needed to minimize distortion around the edges of moving objects, moving artifacts around edges and/or blotchy noise patterns superimposed over the objects.

Sharpness Enhancement: select Sharpness Enhancement from the Advanced Picture Adjust menu to apply edge enhancement to images, giving the impression of added depth. Set it to Off, 1, 2, or 3 as desired.

Runco VX-6000d Owner’s Operating Manual