Runco VX-6000D manual Home Theater Calibration Specifications, Industry-Standard Specifications

Specifications

Table 7-1. VX-6000d Specifications (continued)

Brightness and Contrast	Cinema Standards Measurement System (CSMS)
(variable, depending on	Specifications
RVR calibration):	-	Brightness: 17.2 to 29.7 foot-Lamberts (fL)
	-	Contrast Ratio: 232:1 to 255:1
	These measurements are taken from the projector in a controlled,
	home theater environment. All measurements are made to
	ANSI/NAPM IT7.228-1997 specifications using the Photo Research
	PR-650 SpectraColorimeter and Minolta LS-100 Luminance Meter,
	Video Essentials test DVD and a 1.3 gain, 72-inch wide screen. The
	projector is calibrated to a color temperature of 6,500K and has a
	minimum of 150 hours of usage.
	The foot-Lambert (fL) is the unit of measurement used in commercial
	movie theaters to express image brightness at the screen surface. The
	Society of Motion Picture and Television Engineers (SMPTE) specifies
	16 fL as the target image brightness for film-based projectors using an
	open gate (without film in the projector). More importantly, today
	SMPTE specifies 12 fL as the target image brightness in Digital
	Cinema theaters. The foot-Lambert measurement is dependent on
	screen size, screen gain and projector light output.
	Home Theater Calibration Specifications
	-	Light Output: 462 to 796 ANSI Lumens
	-	Contrast Ratio: 232:1 to 255:1
	These specifications are obtained by calibrating the projector as
	described above for CSMS measurements.
	Industry-Standard Specifications
	-	Light Output: 1700 ANSI Lumens
	-	Contrast Ratio: 4400:1 to 5000:1
	These are typical projector brightness and contrast specifications
	found in most companies’ sales literature. Runco includes these
	measurements in its literature to allow for direct comparison with other
	manufacturers’ projectors. These measurements are typically taken at
	9,000K to 13,000K to get expected performance data when the
	projector is used in professional, commercial and industrial displays.
Power Requirements:	100 to 240 VAC (auto-sensing), 50/60 Hz, 380 Watts
Operating Environment:	40°F to 95°F (5°C to 35°C), 0% to 90% humidity
	(non-condensing)
Dimensions:	See Figure 7-1
Weight (without lens):	73 lbs. (33.11 kg)
Regulatory Approvals:	Complies with FCC, CE C-Tick
Limited Warranty:	Projector: Two (2) years parts and labor from the date of
	delivery to the end user.
	Lamp: 1000 hours or six (6) months, whichever comes first.

Specifications are subject to change without notice.

86 Runco VX-6000d Owner’s Operating Manual