Sharp PG-D100U Projector Distance and Picture Size Relationship, Distance from screen

Page 10
Projector Distance and Picture Size Relationship

Projector Distance and Picture Size Relationship

The zoom lens allows adjustment of the image size within the projector’s range.

For optimum picture adjustment, the projector should be placed and adjusted at a distance between 5.1 ft to 56.3 ft from the screen.

Distance from screen

Picture size: 100 inches (254 cm)

Zoom adjustment range: 18.4 ft to 13.1 ft

Picture size

Projection distance (L)

(diag.)

Maximum projection distance

Minimum projection distance

300 inches

56.3 ft (17.2 m)

40.0 ft (12.2 m)

150 inches

28.0 ft (8.5 m)

19.9 ft (6.1 m)

100 inches

18.5 ft (5.7 m)

13.1 ft (4.0 m)

80 inches

14.8 ft (4.5 m)

10.4 ft (3.2 m)

60 Inches

11.0 ft (3.4 m)

7.8 ft (2.4 m)

40 inches

7.2 ft (2.2 m)

5.1 ft (1.5 m)

The formula for picture size and projection distance y1 = 0.0575 x – 0.097

y2 = 0.041 x – 0.0943

x : Picture size (diag.) (inches)

y1 : Maximum projection distance (m)

y2 : Minimum projection distance (m)

Note:

There is an error of ± 4 inches (± 10 cm) in the formula above.

90°

90°

 

Minimum L: 13.1 ft (4.0 m)

Maximum L: 18.5 ft (5.7 m)

Distance between lens and screen: Projection distance (L)

Lens center

Diagram shows the lens shift position set at the factory.

Above is an illustration of maximum and minimum projection distances for the PG-D100U with a picture size of 100 inches. Move the projector forward or back if the edges of the image are distorted.

Height of projector

Adjust to match the setup configuration.

Screen

Lens center

H

Rack/

stand

Lower edge of screen (white portion)

Picture size

Distance from lens center to

(diag.)

lower edge of screen (H)

 

 

300 inches

25 63/64 inches (66 cm)

150 inches

12 63/64 inches (33 cm)

100 inches

8 21/32 inches (22 cm)

80 inches

7 3/32 inches (18 cm)

60 Inches

5 1/8 inches (13 cm)

40 inches

3 35/64 inches (9 cm)

Ceiling Mount

When the projector is in the inverted position, use the upper edge of the screen as the base line.

Note:

Optimal image quality can be achieved with the projector positioned perpendicular to the screen.

High edge of screen

H

Lenscenter

E-10

Image 10
Contents Model No. PG-D100U Dear SHARP CustomerImportant Information Serial NoIMPORTANT SAFEGUARDS INFORMATIONAbout the Temperature Monitor Function About the Lamp Monitor FunctionVERSATILE REMOTE CONTROL Outstanding FeaturesCautions Concerning the Laser Pointer DIRECT COMPUTER COMPATIBILITYFRONT VIEW Location of ControlsMain Power switch OPERATION PANEL ON TOP OF PROJECTORRemote control handling precautions Operating the Wireless Mouse Remote ControlWireless Mouse Remote Control FRONT VIEWREAR VIEW Using the optional cable with the remote controlTOP VIEW Transmission rangeFunctions and Operations Wireless Mouse FunctionsConnection Example MOUSE buttons2. Turn on the POWER Setting Up the Projector1. Turn on the MAIN POWER 3. Adjusting the FocusDistance from screen Projector Distance and Picture Size RelationshipHeight of projector 1. Press the MENU button Using the Image Invert/Reverse FunctionCaution When setting up the projector 2. Reversed Image ModeExample of a ceiling-mount setup Example of a standard setup TOP VIEWExample of a reversed image setup SIDE VIEW3. Make any minor adjustments necessary 1. Press the adjuster release and lift the2. Remove your hand from the adjuster release Use the carrying handle when carrying the projectorConnecting the Projector Input terminalsConnecting the Projector RGB Computer 640 ⋅ 480 resolution Connecting to the Computer RGB Input/Output Terminals2. Connecting to a Macintosh Series Computer 832 ⋅ 624 resolution4. Connecting to the COMPUTER RGB AUDIO INPUT 3. Connecting to other compatible computers5. Connecting an external monitor For IBM and compatibles Input Signals Recommended TimingFor Apple Macintosh Series ADJUSTMENT / buttons. Adjust the item with the ADJUSTMENT / buttons RGB Adjustment Controls2. Select the item you wish to adjust with the Description of Adjustment Items3. Turn on the POWER Basic Operation of the Projector2. Turn on the MAIN POWER 1. Connect the AC cord6. Change the system mode Setting the ON-SCREEN DISPLAY language5. Select one of eight ON-SCREEN DISPLAY languages On-Screen Display7. Select input 8. Adjust the volume9. To turn off the power from the projector or remote control VIDEO2. Adjust the Picture Adjusting the Picture1. Use the MENU button to select the mode to be adjusted 3. Display Only the Item to Adjust2. Press the ADJUSTMENT / buttons Computer Mode Memory Adjustments1. Press the ENTER button to select the Memory Adjustment mode 3. Press the MENU button anytime to exit RGB ADJAdjusting the Audio 2. Press the E-ZOOM button on the remote E-ZOOM Function1. Press the MENU button to select E-ZOOM mode controlSelecting the Remote Mouse Functions on the ProjectorChecking the system Checking the Lamp Usage TimeUsing the Black Screen Function BLACK SCREENOn-screen Display Using the Blue Screen FunctionUsing the On-Screen Display Override Function REMAIN 5M REMAIN 4M REMAIN 1M4 Clean the AIR FILTER Air Filter Maintenance1 the MAIN POWER Turn OFFMaintenance Indicators Lamp/Maintenance IndicatorsBefore Calling for Service LampIMPORTANT NOTE TO U.S. CUSTOMERS Lamp ReplacementHow to Change the Lamp Removing the lamp unit see figureInstalling the lamp unit Resetting the lamp timerConnection Pin Assignments 1. PC control RS-232C Terminal Specifications4. Commands 2. Communication conditionsSwitch to video screen Set to PAL mode For the RGB/VIDEO setting, select video and set the PAL modeWhen BRIGHT of VIDEO IMAGE ADJUSTMENT is set to ExamplesSpecifications Specifications are subject to change without noticeSide View DimensionsTop View Bottom View