Sharp PG-D100U Basic Operation of the Projector, Connect the AC cord, Turn on the MAIN POWER

Page 20

Basic Operation of the Projector

Basic Operation of the Projector

1

2

OFF

OFF ON

POWER

ON LAMP

TEMP.

2 MAIN POWER switch

1 AC cord

When the MAIN POWER is on, the POWER indicator lights red.

1. Connect the AC cord

Open the socket cover and connect the supplied AC cord to the socket.

2. Turn on the MAIN POWER

Turn the MAIN POWER switch on the side of the projec- tor. The POWER indicator lights red and the projector enters STANDBY mode.

3	Remote control
Projector	Remote control
ON/OFF	ON/OFF
	ON
	OFF

POWER			When the power is on, the LAMP
			REPLACEMENT indicator flashes
			to show the operating condition of
LAMP			the lamp.
LAMP			the lamp.
			Green:	Lamp is ready
TEMP.			Flashing green:	Warming up
TEMP.			Red:	Change bulb

3. Turn on the POWER

Press the POWER ON/OFF button on the projector or the POWER ON button of the remote control.

•When the power is turned off by pressing the POWER ON/OFF button, the POWER indicator will not turn off until the fan has stopped running.

•See page 31, “Lamp/Maintenance Indicators” for details.

Notes:

•When the POWER indicator is not lit, the remote control cannot be used to operate the projector.

•If the power is turned on immediately after it has been turned off, it may take a short while before the lamp turns on. (During this period the LAMP REPLACEMENT indicator flashes.)

•After the projector is unpacked and turned on for the first time, a slight odor may be emitted from the exhaust fan. This odor will soon disappear with use.

4

4. E-ZOOM Function

This projector has an E-ZOOM mode which enlarges the display when inputting an image of less than 800 ⋅ 600 dots in size. The E-ZOOM button of the remote control is used to operate E-ZOOM function.

See page 26, “E-ZOOM Function” for details.

	E-ZOOM (ON)	E-ZOOM (OFF)	Notes:
	E-ZOOM (ON)	E-ZOOM (OFF)	• E-ZOOM function does not operate with monochrome images
			• E-ZOOM function does not operate with monochrome images
			or in SVGA (800 ⋅ 600), Mac 16" (832 ⋅ 624), NTSC, PAL or
			SECAM INPUT mode.
			• The picture size differs in RGB, NTSC, PAL and SECAM
			INPUT modes.

E-20

Image 20

Contents Dear SHARP Customer Important InformationModel No. PG-D100U Serial NoIMPORTANT SAFEGUARDS INFORMATIONAbout the Temperature Monitor Function About the Lamp Monitor FunctionOutstanding Features Cautions Concerning the Laser PointerVERSATILE REMOTE CONTROL DIRECT COMPUTER COMPATIBILITYLocation of Controls Main Power switchFRONT VIEW OPERATION PANEL ON TOP OF PROJECTOROperating the Wireless Mouse Remote Control Wireless Mouse Remote ControlRemote control handling precautions FRONT VIEWUsing the optional cable with the remote control TOP VIEWREAR VIEW Transmission rangeWireless Mouse Functions Connection ExampleFunctions and Operations MOUSE buttonsSetting Up the Projector 1. Turn on the MAIN POWER2. Turn on the POWER 3. Adjusting the FocusHeight of projector Projector Distance and Picture Size RelationshipDistance from screen Using the Image Invert/Reverse Function Caution When setting up the projector1. Press the MENU button 2. Reversed Image ModeExample of a standard setup TOP VIEW Example of a reversed image setupExample of a ceiling-mount setup SIDE VIEW1. Press the adjuster release and lift the 2. Remove your hand from the adjuster release3. Make any minor adjustments necessary Use the carrying handle when carrying the projectorConnecting the Projector Input terminalsConnecting the Projector RGB Computer Connecting to the Computer RGB Input/Output Terminals 2. Connecting to a Macintosh Series Computer640 ⋅ 480 resolution 832 ⋅ 624 resolution5. Connecting an external monitor 3. Connecting to other compatible computers4. Connecting to the COMPUTER RGB AUDIO INPUT For Apple Macintosh Series Input Signals Recommended TimingFor IBM and compatibles RGB Adjustment Controls 2. Select the item you wish to adjust with theADJUSTMENT / buttons. Adjust the item with the ADJUSTMENT / buttons Description of Adjustment ItemsBasic Operation of the Projector 2. Turn on the MAIN POWER3. Turn on the POWER 1. Connect the AC cordSetting the ON-SCREEN DISPLAY language 5. Select one of eight ON-SCREEN DISPLAY languages6. Change the system mode On-Screen Display8. Adjust the volume 9. To turn off the power from the projector or remote control7. Select input VIDEOAdjusting the Picture 1. Use the MENU button to select the mode to be adjusted2. Adjust the Picture 3. Display Only the Item to AdjustComputer Mode Memory Adjustments 1. Press the ENTER button to select the Memory Adjustment mode2. Press the ADJUSTMENT / buttons 3. Press the MENU button anytime to exit RGB ADJAdjusting the Audio E-ZOOM Function 1. Press the MENU button to select E-ZOOM mode2. Press the E-ZOOM button on the remote controlFunctions on the Projector Checking the systemSelecting the Remote Mouse Checking the Lamp Usage TimeUsing the Black Screen Function BLACK SCREENUsing the Blue Screen Function Using the On-Screen Display Override FunctionOn-screen Display REMAIN 5M REMAIN 4M REMAIN 1MAir Filter Maintenance 1 the MAIN POWER4 Clean the AIR FILTER Turn OFFLamp/Maintenance Indicators Before Calling for ServiceMaintenance Indicators LampLamp Replacement How to Change the LampIMPORTANT NOTE TO U.S. CUSTOMERS Removing the lamp unit see figureInstalling the lamp unit Resetting the lamp timerConnection Pin Assignments RS-232C Terminal Specifications 4. Commands1. PC control 2. Communication conditionsFor the RGB/VIDEO setting, select video and set the PAL mode When BRIGHT of VIDEO IMAGE ADJUSTMENT is set toSwitch to video screen Set to PAL mode ExamplesSpecifications Specifications are subject to change without noticeDimensions Top ViewSide View Bottom View