Sharp PG-D100U operation manual Operating the Wireless Mouse Remote Control, Front View, Side View

Operating the Wireless Mouse Remote Control

The functions of your personal computer’s mouse have been built into the remote control enabling you to operate your projector and personal computer with only the remote control.

1.Slide the main power switch on the side of the unit on.

2.Press the POWER ON button on the front panel of the remote control to turn the projector power on.

3.When using the remote control as a wireless mouse, move the MOUSE/ADJUSTMENT sliding switch to the MOUSE position. When using the remote control to operate the projector, move the MOUSE/ADJUSTMENT sliding switch to the ADJ. position. To activate the remote control key back-light feature, press the LIGHT button on the remote control. The colors of the buttons will change as shown in the table at the bottom of this page.

Wireless Mouse Remote Control

FRONT VIEW SIDE VIEW

MUTE button

POWER ON/OFF buttons

E-ZOOM button

TRANSMIT indicator

ON	VOL
	MUTE
OFF
E-ZOOM	LASER/
E-Z	MENU
	MN

VOLUME UP-DOWN buttons

LASER POINTER/MENU button

MOUSE/ADJUSTMENT (/),( / ) buttons

RIGHT-CLICK/ENTER button

N O

/C R

F

F

O

Main power switch of

REMOTE CONTROL

Note:

When transporting the remote control, turn off the main power switch to avoid draining the batteries.

LEFT-CLICK button

INPUT SELECT buttons

MOUSE label

R-CLICK/ENTER

INPUT SELECT

VIDEO DATA

MOUSE ADJ.

LIGHT

Remote control handling precautions

•The laser beam used in this product is harmless when directed onto the skin, however please be careful not to project the beam directly into the eyes. Do not stare into the beam using any optical instrument.

•Do not expose the remote control to shocks, liquids or

high humidity.

The remote control may not operate normally if exposed to

ADJ. label direct sunlight or other intense light sources. Should this happen, reposition the light source or the LCD Projector.

MOUSE/ADJUSTMENT switch

LIGHT button

Using the remote control in a dark room

•Press the LIGHT button to turn on the back-lights for the operation buttons for about 10 seconds.

The back-light colors are explained in the table to the right.

When you change the setting of the MOUSE/ADJUSTMENT switch, the functions of certain buttons on the remote control change. You can tell which function the button currently possesses by the color of its back-light display.

LCD PROJECTOR		Position of MOUSE/ADJUSTMENT Switch
	Button name
		MOUSE		ADJ.
	LASER POINTER/MENU	LASER POINTER (GREEN)		MENU (RED)
	RIGHT-CLICK/ENTER	RIGHT-CLICK (GREEN)		ENTER (RED)
	MOUSE/ADJUSTMENT	MOUSE (NOT LIT)	ADJ.	/ , / (NOT LIT)
	LEFT-CLICK	Yes (NOT LIT)		–––
	POWER ON/OFF
	VOLUME UP-DOWN
	MUTE	Yes (RED)
	E-ZOOM
	VIDEO
	DATA

If the main power switch on the remote contol is left on and the remote control is not used for ten or more minutes, the energy save mode will activate and turn off the power. When in this state, any button operation exceding one second will reactivate the power.

E-6