Connecting to the Computer RGB Input/Output Terminals
You can connect your projector to a computer for easy projection of
1 |
|
|
|
|
| Side view of the projector | |||
|
| |||
|
|
|
|
|
|
|
|
| RGB Signal |
IN | COMPUTER RGB | OUT | Input Socket | |
1.Connecting to an
Plug the RGB signal cable correctly into the RGB INPUT terminal on the projector and into the RGB signal output terminal on the computer, and secure the plugs by tightening the thumb screws.
ANALOG RGB OUT | |
RGB Signal | SVGA, XGA) |
Cable | Series (computer) |
(Supplied) |
|
| RGB Signal |
| Output Socket |
Note:
•This connection is possible only when using a computer with a VGA/SVGA/XGA or Mac display output port.
2 1 |
|
|
|
|
| Macintosh Adaptor (Supplied) |
Macintosh |
|
|
|
| OU | T |
| ALOG | RG | B |
| ||
|
|
|
|
|
| |
| AN |
|
|
|
|
|
RGB Signal
Output Socket
2
Side view of the projector
IN COMPUTER RGB 
OUT
RGB Signal | Macintosh | |
Input Socket | ||
| ||
| RGB Signal Output Socket |
ANALOG
RGB OUT
RGB Signal Cable (Supplied)
2.Connecting to a Macintosh Series Computer
•640 ⋅ 480 resolution
1First, connect the supplied Macintosh adaptor to the RGB signal output terminal on your Macintosh Series computer, as shown on the left, and secure the plugs by tightening the thumb screws.
2Next, firmly plug the supplied RGB signal cable into both the RGB input terminal on the projector and the Macintosh adaptor on the computer, and secure the plugs by tightening the thumb screws.
•832 ⋅ 624 resolution
When connecting in the 832 ⋅ 624 dot mode, use a Macintosh adaptor with display mode switching function available from your local computer dealer.