Sharp PG-D100U operation manual Important Safeguards, Information

Page 2
INFORMATION
U.S.A. ONLY

WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.

U.S.A. ONLY

INFORMATION

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

U.S.A. ONLY

The enclosed RGB signal cable and Macintosh adaptor must be used with the device. The cable and adaptor are provided to ensure that the device complies with FCC Class A verification.IMPORTANT SAFEGUARDSManual background

IMPORTANT SAFEGUARDS

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to ensure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZ- ARD. In order not to defeat the safeguards incorporated into this LCD Projector, observe the following basic rules for its installation, use and servicing. For your own protection and reliable usage of your LCD Projector, please be sure to read these “Important Safeguards” carefully before use.

1)Read Instructions – All the safety and operating instructions should be read before the product is operated.

2)Retain Instructions – The safety and operating instructions should be retained for future reference.

3)Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.

4)Follow Instructions – All operating and use instructions should be followed.

5)Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6)Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7)Water and Moisture – Do not use this product near water – for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8)Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

9)A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10)Ventilation – Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11)Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instruc- tions.

12)Grounding or Polarization – This product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

13)Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience recep- tacles, and the point where they exit from the product.

E-2

Image 2
Contents Model No. PG-D100U Dear SHARP CustomerImportant Information Serial NoIMPORTANT SAFEGUARDS INFORMATIONAbout the Temperature Monitor Function About the Lamp Monitor FunctionVERSATILE REMOTE CONTROL Outstanding FeaturesCautions Concerning the Laser Pointer DIRECT COMPUTER COMPATIBILITYFRONT VIEW Location of ControlsMain Power switch OPERATION PANEL ON TOP OF PROJECTORRemote control handling precautions Operating the Wireless Mouse Remote ControlWireless Mouse Remote Control FRONT VIEWREAR VIEW Using the optional cable with the remote controlTOP VIEW Transmission rangeFunctions and Operations Wireless Mouse FunctionsConnection Example MOUSE buttons2. Turn on the POWER Setting Up the Projector1. Turn on the MAIN POWER 3. Adjusting the FocusHeight of projector Projector Distance and Picture Size RelationshipDistance from screen 1. Press the MENU button Using the Image Invert/Reverse FunctionCaution When setting up the projector 2. Reversed Image ModeExample of a ceiling-mount setup Example of a standard setup TOP VIEWExample of a reversed image setup SIDE VIEW3. Make any minor adjustments necessary 1. Press the adjuster release and lift the2. Remove your hand from the adjuster release Use the carrying handle when carrying the projectorConnecting the Projector Input terminalsConnecting the Projector RGB Computer 640 ⋅ 480 resolution Connecting to the Computer RGB Input/Output Terminals2. Connecting to a Macintosh Series Computer 832 ⋅ 624 resolution5. Connecting an external monitor 3. Connecting to other compatible computers4. Connecting to the COMPUTER RGB AUDIO INPUT For Apple Macintosh Series Input Signals Recommended TimingFor IBM and compatibles ADJUSTMENT / buttons. Adjust the item with the ADJUSTMENT / buttons RGB Adjustment Controls2. Select the item you wish to adjust with the Description of Adjustment Items3. Turn on the POWER Basic Operation of the Projector2. Turn on the MAIN POWER 1. Connect the AC cord6. Change the system mode Setting the ON-SCREEN DISPLAY language5. Select one of eight ON-SCREEN DISPLAY languages On-Screen Display7. Select input 8. Adjust the volume9. To turn off the power from the projector or remote control VIDEO2. Adjust the Picture Adjusting the Picture1. Use the MENU button to select the mode to be adjusted 3. Display Only the Item to Adjust2. Press the ADJUSTMENT / buttons Computer Mode Memory Adjustments1. Press the ENTER button to select the Memory Adjustment mode 3. Press the MENU button anytime to exit RGB ADJAdjusting the Audio 2. Press the E-ZOOM button on the remote E-ZOOM Function1. Press the MENU button to select E-ZOOM mode controlSelecting the Remote Mouse Functions on the ProjectorChecking the system Checking the Lamp Usage TimeUsing the Black Screen Function BLACK SCREENOn-screen Display Using the Blue Screen FunctionUsing the On-Screen Display Override Function REMAIN 5M REMAIN 4M REMAIN 1M4 Clean the AIR FILTER Air Filter Maintenance1 the MAIN POWER Turn OFFMaintenance Indicators Lamp/Maintenance IndicatorsBefore Calling for Service LampIMPORTANT NOTE TO U.S. CUSTOMERS Lamp ReplacementHow to Change the Lamp Removing the lamp unit see figureInstalling the lamp unit Resetting the lamp timerConnection Pin Assignments 1. PC control RS-232C Terminal Specifications4. Commands 2. Communication conditionsSwitch to video screen Set to PAL mode For the RGB/VIDEO setting, select video and set the PAL modeWhen BRIGHT of VIDEO IMAGE ADJUSTMENT is set to ExamplesSpecifications Specifications are subject to change without noticeSide View DimensionsTop View Bottom View