Sharp PG-D100U Location of Controls, Front View, Operation Panel On Top Of Projector, Rear View

Page 5

Location of Controls

Location of Controls

FRONT VIEW

	Focus knob
Remote sensor	Zoom knob Carrying handle

Cooling fan (Exhaust vent)

Cooling fan

(Exhaust vent)

Adjuster

Cooling fan (Intake vent)

CAUTIONS:

•Do not touch the lamp, lamp cage cover, cooling fun, and their surrounding areas while the projector is on. They are very hot and may cause burns.

•Allow at least 4" (10 cm) of space between the cooling fan (exhaust vent) and the other nearest wall or obstruction.

•If the cooling fan becomes obstructed, a protection device will automatically turn off the projector lamp. This does not indicate a malfunction. Remove the projector plug from the wall outlet and wait 10 minutes. Then turn on the power by plugging the cord back in. This will return the projector to its normal mode.

OPERATION PANEL ON TOP OF PROJECTOR

POWER ON/OFF button

POWER indicator

LAMP REPLACEMENT indicator

TEMPERATURE WARNING indicator

MENU button

VOLUME UP-DOWN buttons

ON/OFF

VOL

POWER

MUTE button

LAMPMUTE

INPUT SELECT button

INPUT

TEMP.IN SEL .

ADJUSTMENT

( / ,/) buttons

MENU MN EN ENTER

ENTER button

REAR VIEW

Air suction vent

Speakers

RS-232C (D-sub 9-pin)

Use when controlling the projector from your personal computer.

Main Power switch

OFF ON

MOUSE TERMINAL

Use when operating your personal computer with the wireless mouse remote control. Left Terminal: D-sub 9-pin (for IBM/Mac) Right Terminal: 9-pin mini DIN (for NEC)

S-VIDEO INPUT (4-pin mini DIN)

PC CONTROL

MOUSE

FOR PC98

WIRED

REMOTE

						WIRED REMOTE
VIDEO IN	AUDIO IN					CONTROL INPUT
S-VIDEO	IN	COMPUTER RGB	OUT AUDIO		OUT COMPUTER	(3.5 mm Mono Minijack)
	IN	COMPUTER RGB	OUT AUDIO		OUT COMPUTER	(3.5 mm Mono Minijack)
VIDEO	L R		L	R	AUDIO IN

COMPUTER AUDIO INPUT (3.5 mm Stereo Minijack)

VIDEO INPUT	COMPUTER RGB INPUT	AUDIO OUTPUT: RCA
Video: RCA	connector (HD-15)
Audio: RCA	COMPUTER RGB OUTPUT
	connector (HD-15)

E-5

Image 5

Contents Important Information Dear SHARP CustomerModel No. PG-D100U Serial NoINFORMATION IMPORTANT SAFEGUARDSAbout the Lamp Monitor Function About the Temperature Monitor FunctionCautions Concerning the Laser Pointer Outstanding FeaturesVERSATILE REMOTE CONTROL DIRECT COMPUTER COMPATIBILITYMain Power switch Location of ControlsFRONT VIEW OPERATION PANEL ON TOP OF PROJECTORWireless Mouse Remote Control Operating the Wireless Mouse Remote ControlRemote control handling precautions FRONT VIEWTOP VIEW Using the optional cable with the remote controlREAR VIEW Transmission rangeConnection Example Wireless Mouse FunctionsFunctions and Operations MOUSE buttons1. Turn on the MAIN POWER Setting Up the Projector2. Turn on the POWER 3. Adjusting the FocusHeight of projector Projector Distance and Picture Size RelationshipDistance from screen Caution When setting up the projector Using the Image Invert/Reverse Function1. Press the MENU button 2. Reversed Image ModeExample of a reversed image setup Example of a standard setup TOP VIEWExample of a ceiling-mount setup SIDE VIEW2. Remove your hand from the adjuster release 1. Press the adjuster release and lift the3. Make any minor adjustments necessary Use the carrying handle when carrying the projectorInput terminals Connecting the ProjectorConnecting the Projector RGB Computer 2. Connecting to a Macintosh Series Computer Connecting to the Computer RGB Input/Output Terminals640 ⋅ 480 resolution 832 ⋅ 624 resolution5. Connecting an external monitor 3. Connecting to other compatible computers4. Connecting to the COMPUTER RGB AUDIO INPUT For Apple Macintosh Series Input Signals Recommended TimingFor IBM and compatibles 2. Select the item you wish to adjust with the RGB Adjustment ControlsADJUSTMENT / buttons. Adjust the item with the ADJUSTMENT / buttons Description of Adjustment Items2. Turn on the MAIN POWER Basic Operation of the Projector3. Turn on the POWER 1. Connect the AC cord5. Select one of eight ON-SCREEN DISPLAY languages Setting the ON-SCREEN DISPLAY language6. Change the system mode On-Screen Display9. To turn off the power from the projector or remote control 8. Adjust the volume7. Select input VIDEO1. Use the MENU button to select the mode to be adjusted Adjusting the Picture2. Adjust the Picture 3. Display Only the Item to Adjust1. Press the ENTER button to select the Memory Adjustment mode Computer Mode Memory Adjustments2. Press the ADJUSTMENT / buttons 3. Press the MENU button anytime to exit RGB ADJAdjusting the Audio 1. Press the MENU button to select E-ZOOM mode E-ZOOM Function2. Press the E-ZOOM button on the remote controlChecking the system Functions on the ProjectorSelecting the Remote Mouse Checking the Lamp Usage TimeBLACK SCREEN Using the Black Screen FunctionUsing the On-Screen Display Override Function Using the Blue Screen FunctionOn-screen Display REMAIN 5M REMAIN 4M REMAIN 1M1 the MAIN POWER Air Filter Maintenance4 Clean the AIR FILTER Turn OFFBefore Calling for Service Lamp/Maintenance IndicatorsMaintenance Indicators LampHow to Change the Lamp Lamp ReplacementIMPORTANT NOTE TO U.S. CUSTOMERS Removing the lamp unit see figureResetting the lamp timer Installing the lamp unitConnection Pin Assignments 4. Commands RS-232C Terminal Specifications1. PC control 2. Communication conditionsWhen BRIGHT of VIDEO IMAGE ADJUSTMENT is set to For the RGB/VIDEO setting, select video and set the PAL modeSwitch to video screen Set to PAL mode ExamplesSpecifications are subject to change without notice SpecificationsTop View DimensionsSide View Bottom View