Sharp PG-D100U Lamp Replacement, How to Change the Lamp, Important Note To U.S. Customers

Page 32
Lamp Replacement
U.S.A. ONLY

Lamp Replacement

The lamp in the projector has a finite service life. The lamp for this projector has a usable life of 2000 cumulative hours. This number may differ, however, depending on the ambient conditions. The lamp requires replacement in the situations given below.

•When the picture starts becoming dark and the color contrast deteriorates.

•After the lamp has been used for 1900 hours (at this time the LAMP REPLACEMENT indicator will light red and “LAMP” will flash in yellow letters on the screen when the projector is turned on). The lamp usage time can be checked at the On-Screen display. (See page 27.)

Caution: Once you are alerted that the lamp requires replacement, be sure to replace the lamp.

Purchase a replacement metal-halide lamp unit (lamp/cage module) of the current type BQC-XGNV1U//1 from your nearest Authorized Sharp Industrial LCD Products Dealer. Then change the lamp by carefully following the instruc- tions below.

If you wish, you may bring the projector to your nearest Authorized Sharp Industrial LCD Products Dealer.

IMPORTANT NOTE TO U.S. CUSTOMERS:

The lamp included with this projector is backed by a 90-day parts and labor limited warranty. All service of this projector under warranty, including lamp replacement, must be obtained through an Authorized Sharp Industrial LCD Products Dealer or Service Center. For the name of the nearest Authorized Sharp Industrial LCD Products Dealer or Service Center, please call toll-free: 1-800-BE-SHARP (1-800-237-4277). IMPORTANT NOTE TO U.S. CUSTOMERS:How to Change the Lamp

How to Change the Lamp

Precaution: Take care not to touch either the lamp in the lamp cage, the inner surface of the reflector mirror, or the mirrors in the optical unit with your bare hands.

(d)

(c)

(f)

(e) Removing the lamp unit (see figure)Manual background

Manual background (g)

(j) Manual background

(h)

Manual backgroundManual backgroundManual backgroundManual background (i)

(b)

(a)

Removing the lamp unit (see figure)

1.Press the power button (a) and turn the instrument off. After the cooling fan stops, turn off the MAIN POWER switch (b). Remove the power cord from the AC outlet.

2.The lamp may be extremely hot. Wait at least an hour after the power cord is disconnected before carrying out the following procedures.

3.Turn over the projector and unfasten the user service screw (d) that secures the lamp cage cover (c) as shown in the above diagram. Then remove the lamp cage cover by pulling it in the direction of the arrow.

Note:

When the lamp cage cover (c) has been removed, check that the surface of the lamp cage (h) has fully cooled before proceed- ing with step 4.

4.After the lamp cage (h) has sufficiently cooled, remove securing screws (e), and (f) from the lamp cage.

5.Hold lamp cage (h) by the handle (g) and pull it towards you.

E-32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Dear SHARP Customer Important InformationModel No. PG-D100U Serial NoIMPORTANT SAFEGUARDS INFORMATIONAbout the Temperature Monitor Function About the Lamp Monitor FunctionOutstanding Features Cautions Concerning the Laser PointerVERSATILE REMOTE CONTROL DIRECT COMPUTER COMPATIBILITYLocation of Controls Main Power switchFRONT VIEW OPERATION PANEL ON TOP OF PROJECTOROperating the Wireless Mouse Remote Control Wireless Mouse Remote ControlRemote control handling precautions FRONT VIEWUsing the optional cable with the remote control TOP VIEWREAR VIEW Transmission rangeWireless Mouse Functions Connection ExampleFunctions and Operations MOUSE buttonsSetting Up the Projector 1. Turn on the MAIN POWER2. Turn on the POWER 3. Adjusting the FocusHeight of projector Projector Distance and Picture Size RelationshipDistance from screen Using the Image Invert/Reverse Function Caution When setting up the projector1. Press the MENU button 2. Reversed Image ModeExample of a standard setup TOP VIEW Example of a reversed image setupExample of a ceiling-mount setup SIDE VIEW1. Press the adjuster release and lift the 2. Remove your hand from the adjuster release3. Make any minor adjustments necessary Use the carrying handle when carrying the projectorConnecting the Projector Input terminalsConnecting the Projector RGB Computer Connecting to the Computer RGB Input/Output Terminals 2. Connecting to a Macintosh Series Computer640 ⋅ 480 resolution 832 ⋅ 624 resolution5. Connecting an external monitor 3. Connecting to other compatible computers4. Connecting to the COMPUTER RGB AUDIO INPUT For Apple Macintosh Series Input Signals Recommended TimingFor IBM and compatibles RGB Adjustment Controls 2. Select the item you wish to adjust with theADJUSTMENT / buttons. Adjust the item with the ADJUSTMENT / buttons Description of Adjustment ItemsBasic Operation of the Projector 2. Turn on the MAIN POWER3. Turn on the POWER 1. Connect the AC cordSetting the ON-SCREEN DISPLAY language 5. Select one of eight ON-SCREEN DISPLAY languages6. Change the system mode On-Screen Display8. Adjust the volume 9. To turn off the power from the projector or remote control7. Select input VIDEOAdjusting the Picture 1. Use the MENU button to select the mode to be adjusted2. Adjust the Picture 3. Display Only the Item to AdjustComputer Mode Memory Adjustments 1. Press the ENTER button to select the Memory Adjustment mode2. Press the ADJUSTMENT / buttons 3. Press the MENU button anytime to exit RGB ADJAdjusting the Audio E-ZOOM Function 1. Press the MENU button to select E-ZOOM mode2. Press the E-ZOOM button on the remote controlFunctions on the Projector Checking the systemSelecting the Remote Mouse Checking the Lamp Usage TimeUsing the Black Screen Function BLACK SCREENUsing the Blue Screen Function Using the On-Screen Display Override FunctionOn-screen Display REMAIN 5M REMAIN 4M REMAIN 1MAir Filter Maintenance 1 the MAIN POWER4 Clean the AIR FILTER Turn OFFLamp/Maintenance Indicators Before Calling for ServiceMaintenance Indicators LampLamp Replacement How to Change the LampIMPORTANT NOTE TO U.S. CUSTOMERS Removing the lamp unit see figureInstalling the lamp unit Resetting the lamp timerConnection Pin Assignments RS-232C Terminal Specifications 4. Commands1. PC control 2. Communication conditionsFor the RGB/VIDEO setting, select video and set the PAL mode When BRIGHT of VIDEO IMAGE ADJUSTMENT is set toSwitch to video screen Set to PAL mode ExamplesSpecifications Specifications are subject to change without noticeDimensions Top ViewSide View Bottom View
Top Page Image Contents