Sharp PG-D100U Connecting to other compatible computers, Connecting an external monitor

Page 17

3.Connecting to other compatible computers

4	MOUSE	FOR PC98 WIRED
					REMOTE
	OUT	AUDIO		OUT	COMPUTER
		L	R		AUDIO IN
		L	R

3.Connecting to other compatible computers

When connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA) or Macintosh series, a separate cable is needed. Please contact your dealer for ordering information.

Notes:

•Connecting computers other than the recommended types may result in damage to the projector, the computer, or both.

•Connect the audio from the computer to the COMPUTER AUDIO INPUT terminal.

4.Connecting to the COMPUTER RGB AUDIO INPUT

•RGB AUDIO INPUT accepts COMPUTER RGB input.

•Connect a 3.5 mm Stereo Minijack-RCA L/R cable (not included) from the audio output terminal on the computer to the COMPUTER AUDIO IN terminal on the projector.

5

IN

COMPUTER RGB

OUT

Direct connection

or

External IBM-PC monitor

Optional Macintosh adaptor cable

U.S.A. ONLY

External Macintosh monitor

5. Connecting an external monitor

Connect your computer monitor to the projector’s COM- PUTER RGB OUTPUT terminal to view images simulta- neously on the external monitor and the projection screen.

Caution (Apple Macintosh)

Do not connect the COMPUTER RGB OUTPUT to any monitor except the following:

Apple Color RGB Monitor 13"/14" (640 ⋅ 480) or 16"/17" (832 ⋅ 624)

The output signal from the projector to the monitor should be the same as the input signal from the computer to the projector.

Example: Input 13"/14" (640 ⋅ 480) → Output (640 ⋅ 480) Input 16"/17" (832 ⋅ 624) → Output (832 ⋅ 624)

Note:

•When using the projector with an external IBM-PC monitor, connect the monitor using the supplied cable. When using the projector with a Macintosh monitor, an optional adaptor cable is required. Before using any other type of monitor, carefully check the monitor’s interface specifications and make sure that they match the specifications of the projector’s interface.

The external monitor output will only display an analog computer input signal. It will not display a digital or video input signal. To split the composite video signal, use a video distribution amplifier. This is available from your local dealer. The computer RGB output will only loop through the same

signal connected to the computer RGB input. (VGA IN → VGA OUT, Mac IN → Mac OUT)

E-17

Image 17

Contents Important Information Dear SHARP CustomerModel No. PG-D100U Serial NoINFORMATION IMPORTANT SAFEGUARDSAbout the Lamp Monitor Function About the Temperature Monitor FunctionCautions Concerning the Laser Pointer Outstanding FeaturesVERSATILE REMOTE CONTROL DIRECT COMPUTER COMPATIBILITYMain Power switch Location of ControlsFRONT VIEW OPERATION PANEL ON TOP OF PROJECTORWireless Mouse Remote Control Operating the Wireless Mouse Remote ControlRemote control handling precautions FRONT VIEWTOP VIEW Using the optional cable with the remote controlREAR VIEW Transmission rangeConnection Example Wireless Mouse FunctionsFunctions and Operations MOUSE buttons1. Turn on the MAIN POWER Setting Up the Projector2. Turn on the POWER 3. Adjusting the FocusHeight of projector Projector Distance and Picture Size RelationshipDistance from screen Caution When setting up the projector Using the Image Invert/Reverse Function1. Press the MENU button 2. Reversed Image ModeExample of a reversed image setup Example of a standard setup TOP VIEWExample of a ceiling-mount setup SIDE VIEW2. Remove your hand from the adjuster release 1. Press the adjuster release and lift the3. Make any minor adjustments necessary Use the carrying handle when carrying the projectorInput terminals Connecting the ProjectorConnecting the Projector RGB Computer 2. Connecting to a Macintosh Series Computer Connecting to the Computer RGB Input/Output Terminals640 ⋅ 480 resolution 832 ⋅ 624 resolution5. Connecting an external monitor 3. Connecting to other compatible computers4. Connecting to the COMPUTER RGB AUDIO INPUT For Apple Macintosh Series Input Signals Recommended TimingFor IBM and compatibles 2. Select the item you wish to adjust with the RGB Adjustment ControlsADJUSTMENT / buttons. Adjust the item with the ADJUSTMENT / buttons Description of Adjustment Items2. Turn on the MAIN POWER Basic Operation of the Projector3. Turn on the POWER 1. Connect the AC cord5. Select one of eight ON-SCREEN DISPLAY languages Setting the ON-SCREEN DISPLAY language6. Change the system mode On-Screen Display9. To turn off the power from the projector or remote control 8. Adjust the volume7. Select input VIDEO1. Use the MENU button to select the mode to be adjusted Adjusting the Picture2. Adjust the Picture 3. Display Only the Item to Adjust1. Press the ENTER button to select the Memory Adjustment mode Computer Mode Memory Adjustments2. Press the ADJUSTMENT / buttons 3. Press the MENU button anytime to exit RGB ADJAdjusting the Audio 1. Press the MENU button to select E-ZOOM mode E-ZOOM Function2. Press the E-ZOOM button on the remote controlChecking the system Functions on the ProjectorSelecting the Remote Mouse Checking the Lamp Usage TimeBLACK SCREEN Using the Black Screen FunctionUsing the On-Screen Display Override Function Using the Blue Screen FunctionOn-screen Display REMAIN 5M REMAIN 4M REMAIN 1M1 the MAIN POWER Air Filter Maintenance4 Clean the AIR FILTER Turn OFFBefore Calling for Service Lamp/Maintenance IndicatorsMaintenance Indicators LampHow to Change the Lamp Lamp ReplacementIMPORTANT NOTE TO U.S. CUSTOMERS Removing the lamp unit see figureResetting the lamp timer Installing the lamp unitConnection Pin Assignments 4. Commands RS-232C Terminal Specifications1. PC control 2. Communication conditionsWhen BRIGHT of VIDEO IMAGE ADJUSTMENT is set to For the RGB/VIDEO setting, select video and set the PAL modeSwitch to video screen Set to PAL mode ExamplesSpecifications are subject to change without notice SpecificationsTop View DimensionsSide View Bottom View