Sharp PG-D100U Adjusting the Audio, On-Screen Display, Description of Adjustment Items

Adjusting the Audio

•The projector’s audio is factory preset to the standard setting. However, you can adjust it to suit your own prefer- ence with the ADJUSTMENT buttons on the projector or the remote control.

•You can adjust the BALANCE, TREBLE and BASS, and also select the SRS 3-D SOUND mode.

• To return to the factory preset mode, press the ADJUSTMENT / buttons to select RESET, then press the ENTER button.

•Press the MENU button to select the normal screen mode.

On-Screen Display

A U D I O
B A L A N C E	0	L		R
T R E B L E	0	-		+
B A S S	0	-		+
			[ O F F ]
3 - D S O U N D
R E S E T
: S E L .
: A D J .	MENU : E N D

SRS 3-D SOUND (OFF)

Adjusting the Balance, Treble, Bass

•Press the MENU button.

Select AUDIO with the ADJUSTMENT/ buttons. Then press the ENTER button to change to the picture indicated on the left.

•Select BALANCE, TREBLE or BASS with the

ADJUSTMENT / buttons. Adjust the mode you want with the ADJUSTMENT / buttons.

•To return to the factory preset mode, press the ADJUSTMENT / buttons to select RESET, then press the ENTER button.

Note:

When the SRS 3-D SOUND is turned on, the balance is reset.

On-Screen Display

A U D I O
B A L A N C E	0	L		R
T R E B L E	0	-		+
B A S S	0	-		+
			[ O N ]
3 - D S O U N D
R E S E T
: S E L .	ENTER : N E X T
: A D J .	MENU : E N D

On-Screen Display

3 - D S O U N D

M O D E	1
M O D E	2
M O D E	3
M O D E	4
3 - D M O N O S O U N D
: S E L .	ENTER : E N T E R
	MENU : E N D

Description of Adjustment Items

Selected items	ADJUSTMENT button	ADJUSTMENT button
BALANCE	Increased audio from the	Increased audio from the
	left speaker	right speaker
TREBLE	Weaker treble	Stronger treble
BASS	Weaker bass	Stronger bass

Selecting and Adjusting the SRS 3-D SOUND Mode

The Sound Retrieval System is a sound system that recreates the effect of three dimensional acoustics. This allows one to enjoy a dynamic sound with a feeling of both width and depth.

•Press the MENU button. Select AUDIO with the ADJUSTMENT / buttons. Then press the ENTER button to change to the picture indicated on the left.

•Select SRS 3-D SOUND with the ADJUSTMENT / buttons. Then press the ADJUSTMENT / buttons to select ON, and press the ENTER button to change the image.

•The five types of SRS 3-D modes are listed below. Press the ADJUSTMENT / buttons to highlight the SRS 3-D mode desired yellow. Then press the ENTER button to set the SRS 3-D mode.

Description of Adjustment Items

Mode 1 Sound image that produces an intimate soundfield as

	in a medium-sized hall.
Mode 2	Maximum soundfield as music comes out beyond the
	speakers.
Mode 3	Great for live recording and vocal music.
Mode 4	This setting greatly increases the amount of vocals or
	center sounds in a recording.
Mono	3-D stereo sound from a monaural sound source.

E-25