Visioneer DP1011 manual Connection Ports

Page 11

Precautions

Connection Ports

S-Video Input

Connector

Composite Video

Input

Connector

VGA connector—for

 

computer (PC Analog

 

signal), HDTV, or

 

Component Video

 

Power Connector

Remote Control

Receiver

Kensington™

Lock Slot

Power Connector—Plug the power cord into the projector here.

VGA Connector—Use the VGA cable that you received with your projector to plug in a computer, HDTV, or component video source.

Composite Video Input Connector—Plug in your composite video source here, such as a DVD player or VCR. Requires a standard A/V connecting cable. Connect the yellow (video) plug to your video source and to the projector.

S-Video Input Connector—Plug in your S-Video source here, such as a professional-quality DVD player or VCR. Requires a standard S-Video connecting cable.

Remote Control Receiver—Infrared receiver that receive signals from the remote control. Located on both the front and rear so you can control the projector from either position. Do not cover or block this receiver.

Kensington™ Lock Slot—Slot for inserting a Kensington cable and lock to protect your projector from theft.

Xerox DP1011 User’s Guide

6

Image 11
Contents Xerox DP1011 Projector Page FCC Radio Frequency Interference Statement Table of Contents Welcome Precautions Don’t Do’s and Don’tsWhat’s in the Box Xerox DP1011 Projector Connection Ports Connecting the Projector InstallationTo turn on the projector power Powering On/Off the ProjectorTo turn off the projector power To lower the projector Adjusting the Projected ImageTo raise the projector Adjusting Projection Image Size Adjusting the Projector Zoom/FocusPanel Control Panel Control and Remote ControlUser Controls Remote Control Displaying Menus and Selecting Items On-Screen Display OSD MenusChoose a Language Adjust the Projector Image Adjust the Computer Image Adjust the Video Image Projection Direction Projector ManagementAdjust the PiP Picture in Picture To change the lamp module MaintenanceChanging the Lamp To replace the lamp module, reverse the previous steps Problem No image appears on the screen TroubleshootingIf you are using an Apple PowerBook Problem The screen is outstretched when displaying 169 DVD Problem The image is flickering or otherwise unstableProblem Image has vertical flickering bar Problem Image is our of focusProblem Lamp burns out or make a popping sound Problem Image is reversedInput/Output Connectors Xerox DP1011 Projector SpecificationsIf you have an Apple Macintosh Setting the Screen ResolutionIf you have a Windows PC Compatibility Modes-Windows Computers Resolution AnalogCompatibility Modes-Macintosh Computers Resolution Analog05-0600-000