Visioneer DP1011 manual Adjust the PiP Picture in Picture

User Controls

Adjust the PiP (Picture in Picture)

1.Press the Menu button on the Remote Control or Panel Control to open the OSD.

2.Select the PiP menu and press the Enter button. The PiP menu appears.

3.Use the keys to select the item you want, and use the

keys to adjust the selected setting.

4.When the new settings are what you want, press the Menu button again.

PiP—Turns on and off the PiP function.

PiP Location—Sets the position of the PiP screen on the display screen

PiP Switch Source—Chooses the input source of the projector on the PiP screen.

Reset This Menu—Resets the projector’s display settings to their original factory settings. Select Yes to reset the menu.

NOTE: The OSD does not include a PiP menu in Video mode.

Xerox DP1011 User’s Guide 20