Visioneer DP1011 manual Adjust the Computer Image

Page 22

User Controls

Adjust the Computer Image

1.Press the Menu button on the Remote Control or Panel Control to open the OSD.

2.Select the Computer Image menu and press the Enter button. The Computer Image menu appears.

3.Use the keys to select the item you want, and use the

keys to adjust the selected setting.

4.When the new settings are what you want, press the Menu button again.

Auto Image—Automatically adjust the frequency, tracking, and horizontal and vertical position. For most video sources, Auto Image provides the best results.

Frequency—Changes the display data frequency to match the frequency of your computer’s graphics card. If a vertical flickering bar appears on the image, adjust the frequency until it disappears.

Tracking—Synchronizes the signal timing of the display with the timing of your computer’s graphics card. If the image flickers or is unstable, adjust the tracking until the image is stable.

Horizontal and Vertical Position—Moves the image left and right, and up and down on the screen.

Reset This Menu—Resets the projector’s display settings to their original factory settings. Select Yes to reset the menu.

Xerox DP1011 User’s Guide

17

Image 22
Contents Xerox DP1011 Projector Page FCC Radio Frequency Interference Statement Table of Contents Welcome Precautions Do’s and Don’ts Don’tWhat’s in the Box Xerox DP1011 Projector Connection Ports Installation Connecting the ProjectorPowering On/Off the Projector To turn on the projector powerTo turn off the projector power To raise the projector Adjusting the Projected ImageTo lower the projector Adjusting the Projector Zoom/Focus Adjusting Projection Image SizeUser Controls Panel Control and Remote ControlPanel Control Remote Control On-Screen Display OSD Menus Displaying Menus and Selecting ItemsChoose a Language Adjust the Projector Image Adjust the Computer Image Adjust the Video Image Projector Management Projection DirectionAdjust the PiP Picture in Picture Changing the Lamp MaintenanceTo change the lamp module To replace the lamp module, reverse the previous steps Troubleshooting Problem No image appears on the screenIf you are using an Apple PowerBook Problem Image is our of focus Problem The image is flickering or otherwise unstableProblem Image has vertical flickering bar Problem The screen is outstretched when displaying 169 DVDProblem Image is reversed Problem Lamp burns out or make a popping soundXerox DP1011 Projector Specifications Input/Output ConnectorsIf you have a Windows PC Setting the Screen ResolutionIf you have an Apple Macintosh Resolution Analog Compatibility Modes-Windows ComputersResolution Analog Compatibility Modes-Macintosh Computers05-0600-000