Visioneer DP1011 manual Setting the Screen Resolution, If you have a Windows PC

Page 33

Maintenance

Setting the Screen Resolution

For best viewing on your computer screen, its resolution should be set to 1024 x 768 or less. To reset the screen resolution, follow the steps below, referring to the chart on page 29 for the correct settings for your type of computer and monitor.

If you have a Windows PC:

1.From the Windows Start menu, select Settings/Control Panel and double-click the Display icon.

2.Click the Settings tab.

3.Drag the resolution slider.

4.Click the Advanced button and select the Monitor tab.

5.Select the Refresh rate from the drop-down menu.

Refer to the chart on page 29 for Windows computers for the correct refresh rate for the resolution you selected.

6.Click OK, then click OK on the Display Properties dialog box.

If you have an Apple Macintosh:

1.From the Apple menu, select Control Panels/Monitors & Sound.

2.Click the Monitor icon.

3.Select the resolution and refresh rate from the resolution menu.

Refer to the chart page 30 for Apple Macintosh computers for the compatible resolutions for you type of Apple computer.

4.Click the Close box.

Xerox DP1011 User’s Guide

28

Image 33

Contents Xerox DP1011 Projector Page FCC Radio Frequency Interference Statement Table of Contents Welcome Precautions Don’t Do’s and Don’tsWhat’s in the Box Xerox DP1011 Projector Connection Ports Connecting the Projector InstallationTo turn on the projector power Powering On/Off the ProjectorTo turn off the projector power Adjusting the Projected Image To raise the projectorTo lower the projector Adjusting Projection Image Size Adjusting the Projector Zoom/FocusPanel Control and Remote Control User ControlsPanel Control Remote Control Displaying Menus and Selecting Items On-Screen Display OSD MenusChoose a Language Adjust the Projector Image Adjust the Computer Image Adjust the Video Image Projection Direction Projector ManagementAdjust the PiP Picture in Picture Maintenance Changing the LampTo change the lamp module To replace the lamp module, reverse the previous steps Problem No image appears on the screen TroubleshootingIf you are using an Apple PowerBook Problem Image has vertical flickering bar Problem The image is flickering or otherwise unstableProblem Image is our of focus Problem The screen is outstretched when displaying 169 DVDProblem Lamp burns out or make a popping sound Problem Image is reversedInput/Output Connectors Xerox DP1011 Projector SpecificationsSetting the Screen Resolution If you have a Windows PCIf you have an Apple Macintosh Compatibility Modes-Windows Computers Resolution AnalogCompatibility Modes-Macintosh Computers Resolution Analog05-0600-000