Visioneer DP1011 manual Powering On/Off the Projector, To turn on the projector power

Page 13

Installation

Powering On/Off the Projector

To turn on the projector power

1.Remove the lens cap.

2.Make sure that the power cord and the cables from the video sources are securely connected to the projector.

3.Turn on the lamp by pressing the Power button on the control panel or on the Remote Control.

The startup screen displays for 20 seconds and the Power/Standby indicator flashes green.

When the startup screen disappears, the Power/Standby indicator turns a steady green.

4.Turn on your video source device (computer, notebook, DVD player, video player, etc.). The projector detects the video source automatically.

If the screen displays “No Signal”, please make sure the signal cables are securely connected.

If you connect multiple sources at the same time, use the Source button on the remote control or control panel to switch among them.

NOTE: Turn the projector on first, then the computer.

Power

Lens cap

Xerox DP1011 User’s Guide

8

Image 13

Contents Xerox DP1011 Projector Page FCC Radio Frequency Interference Statement Table of Contents Welcome Precautions Don’t Do’s and Don’tsWhat’s in the Box Xerox DP1011 Projector Connection Ports Connecting the Projector InstallationTo turn on the projector power Powering On/Off the ProjectorTo turn off the projector power To raise the projector Adjusting the Projected ImageTo lower the projector Adjusting Projection Image Size Adjusting the Projector Zoom/FocusUser Controls Panel Control and Remote ControlPanel Control Remote Control Displaying Menus and Selecting Items On-Screen Display OSD MenusChoose a Language Adjust the Projector Image Adjust the Computer Image Adjust the Video Image Projection Direction Projector ManagementAdjust the PiP Picture in Picture Changing the Lamp MaintenanceTo change the lamp module To replace the lamp module, reverse the previous steps Problem No image appears on the screen TroubleshootingIf you are using an Apple PowerBook Problem Image has vertical flickering bar Problem The image is flickering or otherwise unstableProblem Image is our of focus Problem The screen is outstretched when displaying 169 DVDProblem Lamp burns out or make a popping sound Problem Image is reversedInput/Output Connectors Xerox DP1011 Projector SpecificationsIf you have a Windows PC Setting the Screen ResolutionIf you have an Apple Macintosh Compatibility Modes-Windows Computers Resolution AnalogCompatibility Modes-Macintosh Computers Resolution Analog05-0600-000